Active Member
|
[China]
Address: Qihang Building D-709,Hanghai Road,Zhengzhou City,Henan Province,China
Contact name:Luna
Henan Yuanda Boiler Co., Ltd. |
|
|
5Ton Diesel Oil Fired Thermal Oil Boiler For Carboard And Paper Factory
Thermal oil boiler introduction
YY(Q)W series thermal oil boiler is designed base on the forced circulation theory, thermal conduction oil runs as the medium and provides high temperature at the low pressure. Available fuel: gas, oil, diesel, heavy oil, lpg, cng, dual fuel.
YY(Q)W series of organic heat carrier boiler is quick-fitting forced circulation fuel oil(gas)boiler,this series boiler's is compact structure,the heating area is constituted by closed coil pipes from inside(or internal and external),inside coil pipes are the radiation heating surface.
Advanategs Thermal Oil Boiler Design
1.It is easy and convenient to install the boiler,only setting the
boiler on the foundation.
2.Heating surface is formed by round coilers,sufficient
arrangement,reducing thermal load of tubes surface to ensure
safety.
3.Furnace dimensions is matching with the combustion flame,positive
pressure combustion,high radiation heat exchange efficiency.
4.Boiler structure is compact,saving the floor area of boiler room.
5.An air pre-heater or heat recovery boiler is placed behind the
boiler to improve the thermal efficiency.
Technical parameters table
| Design parameter | Unit | Date | |
| Rated power supply | Kw | 3000 | |
| Working medium | L-QD340 thermal conductive oil | ||
| Circulating oil | m3/h | 160.7 | |
| Maximum working pressure | MPa | 0.8 | |
| Heating surface | radiation | m2 | 21.5 |
| convection | m2 | 124 | |
| Economizer heating surface | m2 | 63.9 | |
| Thermal oil flow rate | m/s | 3.12 | |
| Furnace media capacity | m3 | 2.24 | |
| Thermal efficiency | η | 92.08%(gas)92.57(oil) | |
| Auxiliary power | KW | 65.5 | |
| exhaust temperature | ℃ | 142.26(138.3) | |
| Rated oil temperature | ℃ | 290 | |
| Fuel consumption | Kg/h | 385.16Nm3/h(gas)313.41Kg/h(oil) | |
| Maximum transport size | mm | 5600×2400×3170 | |
The listed technical parameters are for reference only and can be designed according to different requirements of users.
Application use industry
1. In the road construction project, it is mainly used for heating
and insulation of asphalt heating, dissolving, asphalt storage
tank, asphalt concrete and emulsified asphalt.
2. In the building materials industry, the heat transfer oil
furnace is mainly used for gypsum board drying, concrete member
solidification protection and prefabrication production, tile
stamping, decorative material drying and linoleum production line
heat.
3. In the wood industry, it is mainly used for the hot pressing of
fiberboard, particleboard, laminate, plywood, veneer and wood
drying equipment, drying equipment, coating equipment and glue
machine heating.
4. In the fat industry, the heat transfer oil furnace is mainly
used for heating of oil, such as oil decomposition, fatty acid
distillation, lipidation, nitrification, hydrogenation reflection,
concentration, vacuum deodorization and the like.
5. In the paper industry, it is mainly used for heating of glue
roller, drying roller, drying room, drying cabinet, hot melt
machine, melting wax pot and corrugated paper processing.
6. In the fat and paint industry, it is mainly used for heating in
autoclaves, dryers, distillation irrigation, evaporation equipment,
paint drying, baking, drying and high temperature curing.
7. In the medical industry, it is mainly used for the preparation
of drugs, raw material mixing, disposition, disinfection,
distillation, evaporation, melting and other equipment and
equipment heating.
