CENO Electronics Technology Co.,Ltd |
Verified Suppliers
|
|
Hallow Shaft Slip Ring With 100mm Bore Long Life And Easy To Install For Radar Antenna
The model ECN100 is a big bore through bore slip ring and has many circuits for optional. It transmits 5A,10A,15A current per circuit . It also provides an economical, readily available solution when a compact through-bore configuration is required. This unit provides a 100mm through-bore for routing hydraulic or pneumatic lines for minimal space applications..
Features
Applications
Optional
Parameter
ECN100 Specification | Picture | |
Circuit | 6,12,18,24 or more | |
Current | 5A,10A,15A/circuit | |
Voltage | 380VAC | |
Electrical noise | 10 milliohms max | |
Dielectric strength | ≥1000V@50Hz | |
Insulation resistance | 1000MΩ@ 500VDC | |
Operating speed | 300rpm or higher | |
Protection grade | IP54 | |
Operating temperature | -20~+60℃ | |
Through hole size | 100mm |
Outline drawing
Length
L (mm) | ||||
6 circuits | 12 circuits | 18circuits | n circuits | |
5A/10A | 69 | 96 | 123 | 44+n*2.5+(n-1)*2 |
15A/20A | 72 | 102 | 132 | 44+n*3+(n-1)*2 |
25A/30A | 81 | 120 | 159 | 44+n*4.5+(n-1)*2 |
Q: Do you offer hybrid design with electrical channel and fluid or
air channel combination?
Yes,CENO air/fluid rotary union and electrical slip ring can
be integrated together into one complete solution.The solution can
for fluid, power, signal, and data transfer. We offer both standard
assemblies and custom solutions to meet your exact requirements.
Welcome to consult us with your demands.
Q: How do we mount the hollow shaft slip ring on our machinery?
Hollow shaft mounting way
1) Position the slip ring in the desired location and equally
tighten both set screws to the shaft on each end of the union.
Torque to 25 lb-in.
2) Route the wiring and make the necessary connections. Do not
allow the wiring to restrict free rotation of the slip ring.
3) Position a screw or dowel (not supplied) in the anti-rotation
tab.
Flange mounting way
1) Align the mounting holes in the flange to mounting base and
install flat washers and thread forming screws (NOT SUPPLIED) for
plastic. Securely tighten screws.
2) Route the wiring and make the necessary connections. Do not
allow the wiring to restrict free rotation of the slip ring.
3) Position a screw or dowel (not supplied) in the anti-rotation
tab.
CENO Advantage
Member in engineering team have more than 10 years experience in
slip ring's field.Operators work on critical procedure are all
qualified by internal training.
Why choose CENO
CENO is one technologically company in slip ring field who engages research and development,manufacturing and sales.We have advanced equipment and high precision test instruments to ensure products quality and reliable performance.Facility area covers 3000 square meters and located in China.
Honor
ISO9001,CE,RoHS,UL,Explosion-proof
Service CENO provides
Solution offerring for 360° rotation system.
Mass and customized production.
24 hours,7days consultant service.
Consult us with your requests for any 360° rotation system.We will
provide one stop service to you timely respond your inquiries.