Mitsubishi EZMOTION MR-E Super AC Servo Amplifier MR-E-70A-KH003 Industrial Control Drive

Mitsubishi EZMOTION MR-E Super AC Servo Amplifier MR-E-70A-KH003 Industrial Control Drive

Introduction

The Mitsubishi general-purpose AC servo MR-E Super has position control and internal speed control modes. It can perform operation with the control modes changed, e.g. position/internal speed control. Hence, it is applicable to wide range of fields such as precision positioning and smooth speed control of machine tools and general industrial machines. As this new series has the RS-232C or RS-422 serial communication function, a MR Configurator (servo configuration software)-installed personal computer or the like can be used to perform parameter setting, test operation, status display monitoring, gain adjustment, etc. With real-time auto tuning, you can automatically adjust the servo gains according to the machine. The MR-E Super servo motor is equipped with an incremental position encoder that has the resolution of 131072 pulses/rev to ensure high precision positioning.

(1) Position control mode

An up to 1Mpps high-speed pulse train is used to control the speed and direction of a motor and execute precision positioning of 131072 pulses/rev resolution. The position smoothing function provides a choice of two different modes appropriate for a machine, so a smoother start/stop can be made in response to a sudden position command. A torque limit is imposed on the servo amplifier by the clamp circuit to protect the power transistor in the main circuit from overcurrent due to sudden acceleration/deceleration or overload. This torque limit value can be changed to any value with the parameter.

(2) Internal speed control mode

The parameter-driven internal speed command (max. 7 speeds) is used to control the speed and direction of a servo motor smoothly. There are also the acceleration/deceleration time constant setting in response to speed command, the servo lock function at a stop time.

Specifications

• Power Supply Voltage/Frequency :3-phase 200 to 230VAC, 50/60Hz or 1-phase 230VAC, 50/60Hz
• Power Supply Permissible vol0tage fluctuation : 3-phase 200 to 230VAC: 170 to 253VAC, 50/60Hz, 1-phase 230VAC: 207 to 253VAC, 50/60Hz
• Power Supply Permission frequency Flucation : Within +/- 5 %
• Control system : Sine-wave PWM control, current control system
• Dynamic brake : Built-in
• Protective Functions : Overcurrent shut-off, regenerative overvoltage shut-off, overload shut-off (electronic thermal relay), encoder error protection, regenerative erroe protection, undervoltage, instantaneous power failure protection, overspeed protection, excessive error protection)
• Mass[Kg] : 2.7

Combination with servo motor

The following table lists combinations of servo amplifiers and servo motors. The same combinations apply to the servo motors with an electromagnetic brake. HF-KN/HF-SN servo motor is available for the servo amplifier with software version A9 or later.

Mitsubishi MR-J2S Series Servo Drive

Nameplate

 

 

 

Model

 

 

 

We specialize in selling and servicing a wide range of Mitsubishi products and components:

 

• MDS and MR Series AC Servo Drives
• MDS and FR Series AC Spindle Drives
• FR Series General Purpose Inverters and Braking Modules
• HA / HC / HF / HP / HS Series AC Servo Motors
• SJ Series AC Spindle Motors
• CNC Boards
• Power Supplies

 

• All the Mitsubishi Parts are new and original with package.
• Warranty time: 180 or 360 days.

Good Service in WTL:
 
> Please send your RFQ to get the latest price.
 
> Normally, we will ship the items in 1-2 weeks after receive the payment.
 
> We can ship to you by UPS/DHL//EMS/Fedex. Please contact us and we will use your preferred ways.
 
> We have a large stock and the prices are variable, so sometimes the prices we post are not accurate. If needed, please contact us for specific prices.
 

 Liability: