|
[China]
Trade Verify
Address: 23E BlockB,Lushan Building，Chunfeng Road,Luohu District,Shenzhen,518001,China
Contact name:Eva
Shenzhen Wisdomlong Technology CO.,LTD |
|
Verified Suppliers
|
|
|
1PC YASKAWA SIGM5 750W 5.3A 3Phase Motor SGMAV-08ADA61 AC SERVO
MOTOR NEW ORIGINAL
| Manufacturer: | Yaskawa |
| Series: | Motors |
| Weight: | Ask |
| Approvals: | UL, CE, cUL Recognized |
| Brake: | No |
| Brand: | Yaskawa |
| Constant Torque (Lb-In): | 21.153,1 |
| Constant Torque (Nm): | 2.39 |
| Constant Torque (Oz-In): | 338.451 |
| Encoder Bit Resolution: | 20 BIT |
| Encoder Type: | Incremental |
| H x W x D: | 3.15 in x 3.7 in x 6.1 in |
| IP Rating: | IP65 |
| kW: | 0.75 KiloWatts |
| Max Speed: | 6,000 RPM |
| Mounting Type: | Flange Mount |
| Peak Torque (Lb-In): | 63.37 |
| Peak Torque (Nm): | 7.16 |
| Peak Torque (Oz-In): | 1,013.939 |
| Rated Speed: | 3,000 RPM |
| Series: | SGMAV |
| Servomotor Type: | Rotary |
| Shaft Seal: | Yes |
| Subcategory: | Servo |
| Voltage: | 200 VAC |
OTHER SUPERIOR PRODUCTS
DC Servo Motors
A DC servo motor consists of a small DC motor, feedback
potentiometer, gearbox, motor drive electronic circuit and
electronic feedback control loop. It is more or less similar to the
normal DC motor.
The stator of the motor consists of a cylindrical frame and the
magnet is attached to the inside of the frame.
The rotor consists of brush and shaft. A commutator and a rotor
metal supporting frame are attached to the outside of the shaft and
the armature winding is coiled in the rotor metal supporting frame.
A brush is built with an armature coil that supplies the current to
the commutator. At the back of the shaft, a detector is built into
the rotor in order to detect the rotation speed.
With this construction, it is simple to design a controller using
simple circuitry because the torque is proportional to the amount
of current flow through the armature.
And also the instantaneous polarity of the control voltage decides
the direction of torque developed by the motor. Types of DC servo
motors include series motors, shunt control motor, split series
motor, and permanent magnet shunt motor.
1.The power supply voltage varies the characteristics of the
repetitive use area.
The solid line shows three phase 200 V single phase 230 V input,
the broken line is single phase 200V input, and the single dot
chain line shows the characteristic when the single phase 100V is
input.
However, the sgma-a5a type has the same characteristics in three
phases 200 V and single phase 200V.
2.If the effective torque is within rated torque, it can be used
within the repeated use area.
3.Note that the voltage drop increases and the repetitive use area
is narrow for the servo motor main circuit cable over 20 meters.
See the catalog for more details.
