Shenzhen Wisdomlong Technology CO.,LTD |
Verified Suppliers
|
|
GE FANUC SERIES 90-30 PLC Digital I/O Module IC697MDL240 FACTORY
SEALED
Product Description:
GE Fanuc Discrete input module for 90 - 30 series PLC offers 16
input points with one common power input terminal. It requires an
AC power source for convenient operation. Module has LED indicators
at the top to offer ON/OFF status of each point. Module has circuit
wiring information on the surface towards the inside and circuit
identification information on the outside surface. Module has a
voltage rating of 120 VAC at 50/60 Hz, 0 - 132 VAC at 50/60 Hz,
input current rating of 12 milli-Amps and a power rating of 90
milli-Amps at 5 VDC. It has a maximum ON response time of 30
milli-seconds and maximum OFF response time of 45 milli-seconds.
Module is compatible with input devices such as pushbuttons, limit
switches and electronic proximity switches. Input/output module
provides the interface between the PLC and external input devices
such as proximity sensors, push buttons, switches and BCD
thumbwheels. It supports different voltage ranges, types, current
capacity, isolation and response time to meet your application.
Product Details:
Input modules provide the interface between the PLC and external
input devices such as proximity sensors, push buttons, switches and
BCD thumbwheels. Output modules provide the interface between the
PLC and external output devices such as contactors, interposing
relays, BCD displays and indicator lamps. This module requires an
AC power source, it cannot be used with a DC power source.
Product Summary:
Rated Voltage: 120 Volts AC, 60 Hz Sinusoidal
Inputs Per Module: 16 Individually Isolated
On-state Voltage: 75 volts to 132 volts, 60 Hz sinusoidal
Off-state Voltage: 0 to 20 volts, 60 Hz sinusoidal
On-state Current: 8mA to 15 mA
Description: 120 VAC Isolated Input 16-PT
Off-state Current: 0 to 4mA (2.2mA minimum at 25V input)
Filter Delay Time: 20ms typical
Current Req. from 5V Bus: 0.25 amps
VME: System designed to support the VME standard C.1
Features: 16 isolated points, 20 ms input filter, proximity switch compatible
Product Description: The 120 Volt AC Isolated Input Module provides 16 input points which are isolated. This allows each point to be used on a different phase of the AC supply. The input is reactive (resistor/capacitor input) with current-voltage characteristics which meet IEC standard (type 2). The input characteristics are compatible with a large range of available proximity switches. LED indicators which give the ON-OFF status of each point on the logic (PLC) side of the circuit are included at the top of the module. The module is mechanically keyed to allow correct replacement with a similar type in the field. I/O references are user configurable without the use of jumpers or DIP switches on the module.
Type of Device: 120 Volt AC, Isolated, 16-Point Input Module
Rated Voltage: 120 Volts AC, 60 Hz Sinusoidal
Inputs Per Module: 16 Individually Isolated
Isolation: 1500 volts RMS - any input to backplane, 500 volts RMS between inputs
Input Current: 10mA (typical) at rated voltage (reactive)
On-state Voltage: 75 volts to 132 volts, 60 Hz sinusoidal
Off-state Voltage: 0 to 20 volts, 60 Hz sinusoidal
On-state Current: 8mA to 15 mA
Related Product Recommendation:
GE | VCIB-16A | GE | DS200CDBAG1ACA |
GE | VMIVME-7671-421000 | GE | DS200DCFBG2BNC |
GE | 269PLUS-100P-120 | GE | DS200FCRRG1AKD |
GE | 369-HI-0-0-0-0 | GE | DS200LDCCH1ARA |
GE | 369-HI-R-0-0-0 | GE | DS200LRPAG1AGF |
GE | 531X111PSHAPG3 | GE | DS200PCCAG5ACB |
GE | 531X113PSFARG1 | GE | DS200PCCAG9ACB |
GE | 531X123PCHACG1 | GE | IC693DSM302 |
GE | 531X139APMARM7 | GE | IC693MDL330 |
GE | 531X303MCPBCG1 | GE | IC693MDL646 |
GE | 531X305NTBACG1 | GE | IC693MDL655 |
GE | 531X305NTBAPG1 | GE | IC693MDL730 |
GE | IC200ALG322 | GE | IC693MDL752 |
GE | IC200ALG620 | GE | IC693PBS105 |
GE | IC200ALG630 | GE | IC693PCM301 |
GE | IC200CHS002 | GE | IC200MDL742 |
GE | IC200MDL740 | GE | IC200CPUE05 |
GE | IC3600LTGA | GE | IC200PWR101 |
GE | IC3600TUAA1 | GE | IC200PWR001 |
GE | IC660BBD025 | GE | IC693PWR330 |
GE | IC670MDL640 | GE | IC694APU300 |
GE | IC670PBI001 | GE | IC694BEM331 |
GE | IC693ACC310 | GE | IC694MDL645 |
GE | IC693ALG223 | GE | IC694MDL655 |
GE | IC693ALG390 | GE | IC694MDL740 |
The use of the product:
Terms:
We ships worldwide and accepts T/T and Paypal.
All items are subject to availability and passing our QA testing
and inspection.
Turnaround Time:
Standard order processing is 1-2 business days plus shipping method
chosen.
Rush and off-hours service available for an additional fee
Packaging and Handling:
Items are safely packaged in custom shipping cartons for
protection.
Shipping:
We ship worldwid use UPS, FedEx, DHL, or Truck Freight when needed.
Call to use a shipping service other than the ones listed.
International Customers are responsible for all Customs fees, VAT,
and other fees applied by their
respective countries.
All shipments are fully insured.
Conact Person: