|
[China]
Trade Verify
Address: 23E BlockB,Lushan Building，Chunfeng Road,Luohu District,Shenzhen,518001,China
Contact name:Eva
Shenzhen Wisdomlong Technology CO.,LTD |
|
Verified Suppliers
|
|
|
YASKAWA SGMRS-13A2A-YR11 AC Spindle SERVO MOTOR w/UTSAE-B17CL ENCODER 17 bit
QUICK DETAILS
DESCRIPTION
Internal encoders
Specifications
Manufacturer: Yaskawa
Product number: UTSAE-B17CL
Vendor number: 500-024-050-1
Description: UTSAE-B17CL is an Internal encoders manufactured by Yaskawa
Series: UT series Encoders for AC Servo and Spindle motors
Type: Absolute Encoder
Construction of encoder: Coupled with couplings for motor (complete)
Resolution: 17 bit
Name of series: CL
Application or Nodification: None
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- | Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- | Emerson VE-,KJ- |
| Honeywell TC-,TK- | GE Modules IC - |
| Fanuc motor A0- | Yokogawa transmitter EJA- |
<1> Only available in software version S1018 and later. The
software version (PRG) is indicated on the nameplateaffixed to the
side of the drive.
<2> EnDat 2.2/22 and HIPERFACE are available in drive
software PRG:7016 and later.Drive Model Number
A1000 All models <1>
L1000A All models <2>
YASKAWA ELECTRIC TOBP C730600 51F 1000-Series Option PG-F3
Installation Manual 9
3 Receiving
3 Receiving
Please perform the following tasks upon receiving the option:
• Inspect the option for damage. Contact the shipper immediately if
the option appears damaged upon receipt.
• Verify receipt of the correct model by checking the model number
printed on the option nameplate (Refer to Figure 1 on page 10 for
more information).
• Contact your supplier if you have received the wrong model or the
option does not function properly.
Tools Required for Installation
• A Phillips screwdriver (M3 metric / #1, #2 U.S. standard size) is
required to install the option.
• A flat-blade screwdriver (blade depth: 0.4 mm, width: 2.5 mm) is
required to wire the option terminal block.
• A pair of diagonal cutting pliers.
• A small file or medium-grit sandpaper.
Note: Tools required to prepare option cables for wiring are not
listed in this manual.
A – Terminal block TB1 E – Installation hole
B – Terminal block TB2 F – Model number
C – Jumper for PG encoder power
supply voltage (CN3) <1>
G – Ground terminal and installation hole <2>
<1> Refer to Table 5 on page 24 for details.
<2> The ground wires provided in the option shipping package
must be connected during installation
