High Intensity Industrial Screw Compressor With Aluminum Profile Shell

High Intensity Industrial Screw Compressor With Aluminum Profile Shell
 
Industrial Screw Compressor  DETAILS
 
SKF-bearing
 
Compared with bearings of other brands, SKF bearing, it has good abrasive resistance, superior fatigue resistance, strong corrosion resistance and comfortable muting property, making longer service life, higher reliability and lower noise of permanent magnetic synchronous non-inductive motor.
 
Infinite volume control air inlet system
 
The compressor adopts infinite volume control air inlet system. It could operate without magnetic valve. Built-in function of the check valve can reduce malfunctions. The compressor is free from unloading process and shows higher energy efficiency. This compressor can operate at frequencies from 0-300HZ and realize high energy efficiency in real sense.
 
Industrial manager function
 
Wan Beardsley air compressor system can pre-set weekly work schedule according to your working hours in the factory, air compressor will punctually and automatically power on ana off accordinq to preset working schedule
 
High-performance vector frequency converter

• equipped with standard dust screen, circuit board is processed with surface coating, so antifouling, anti-dust and damp-proof effects are realized;
• Special heat dissipation design prevents tripping under summer high temperature;
• Standard protocol of CAN with wire road standard of hardware and strong noise resistance;
• Rapidly track change of pressure, control pressure fluctuation within ±0.01Mpa, optimal power is used to accurately provide necessary air amount;
• Advanced integrated draught fan, and motor uses double-vector variable-frequency control technology.

Lowest Operating Energy Cost
 

• When the energy accounts for above 70% of the life cycle cost (LCC) of compressor, the energy consumption optimization becomes essential. In fact, the power consumption for the production of compressed air accounts for over 40% of the total power consumption of the plant, so the energy consumption optimization can even determine its success. Using the permanent-magnetism frequency-conversion technology of Dresdnerlan, we can provide partners for your cost saving. WZS series of products can truly reflect the demand for compressed air, making substantial energy saving become a reality
• Traditional compressors are operated between two set pressure points using the control methods of "full load and no load". The compressor turns into no load mode when the pressure reaches the maximum. When the air demand is medium or low, the no-load power will be consumed excessively, which will result in large amount of waste.
• Because no unnecessary power consumption will be generated, the energy cost reduced by the permanent-magnetism frequency-conversion can be up to 35% or more. The life cycle cost (LCC) of the compressor can be reduced by an average of 22%. In a word, compared with the compressor with invariable rotate speed, Wan Beardsley compressor can recover the extra cost within 1 or 2 years

 
Difference of servo permanent magnetic variable-frequency technology and non-variable frequency technology in energy conservation
 
Non variable-frequency unit regulates demand for air discharqe with modulatinq capacity valve, while servo permanent magnetic variable-frequency unit regulates demand for air discharge in way of motor frequency conversion, and comparison of energy conservation between the two is as following:
 

 
Our Advantage:

          Every permanent magnet variable-frequency air compressor produced by Wan Beardsley through sophisticated air compressor vector frequency control technology reaches national grade-2 energy-saving effect, some products have grade-one energy efficiency, Wan Beardsley screw air compressor is featured by high efficiency, low noise, small vibration, small volume, low expense, convenient maintenance, beautiful appearance and so on, the product uses intelligent module control system and favorable human-machine interface to realize fault self diagnosis, servo-type gas flow automatic adjustment and 24-hour unattended operation, and it belongs to one of the most advanced machine type both home and abroad. At present, Wan Beardsley series of screw air compressors include: integrated permanent magnet variable-frequency series, non-inductive permanent magnet variable-frequency series, servo permanent magnet variable-frequency series, low-pressure permanent magnet variable-frequency series, two-stage compression permanent magnet variable-frequency series, oil cooling permanent magnet variable-frequency series of screw air compressors, refrigerated dryer series, adsorption dryer series, combined dryer series, high-efficiency precision dryer, gasholder, etc. Products are extensively applied to industries like machinery, furniture, textile, chemical fiber, medicine, food, metallurgy, electronics, war industry, environmental protection, etc.