Hook Type Shot Blasting Machine For Machinery, Foundry, Forging,
Mechanical And Steel Industry
Supply ability:250 units/year
Surface finish level:SA2.5
Installation date:5-7 days
|Product Name||Hook shot blasting machine|
|Applied to wach material||casting, metal parts, profiles etc|
|Applicable industry||machinery, foundry, forging, mechanical and steel industry|
|function||Improve anti-fatigue performance, Improve corrosion resistance|
|Voltage||380V/50HZ or 220V/60HZ||Warranty||One year|
|Power||Electricity||Certificate||CE, ISO 9001|
|Cleaning method||Automatic||Electrical control system||Auto-detection, auto-alarm and auto-cutout.|
|Cleaning material||Shot steel/shot grit/wire cut etc||After-sales service||Engineers available to service machinery|
|If you have any question or concerns. pls feel free to contact us.|
|rotating speed r/min||3160||2900||2900||2930|
|impeller diamter mm||Φ280||Φ386||Φ386||Φ420|
|blasting capacity kg/min||2*60||2*100||2*100||2*200|
|cleaning room size mm||1150*950*1300||1400*1400*1800||1400*1400*1800||1700*1650*2100|
|maxim workpiece size mm||Φ300*1000||Φ600*1200||Φ600*1200||Φ800*1500|
|maxim load capacity kg||300||800||800||800|
|work time for every hook min||5～15||5~15||5~15||5~15|
|elevator load capacity t/h||8||12||12||25|
|ventilation capacity m3/h||2000||5400||5400||5400|
|motor power kw||14||22.35||23.1||30.1|
|outline dimensions mm||1500*1300*3600||3500*2300*4600||3500*2300*4600||4000*2700*5000|
| ||pulse filter dust collector is optional|
Application: Machine is specifically designed for the continuous
external surface treatment of pipes and cylindrical parts ( bottles
Coating with bituminous products oxide and calamine removal,
preparation to painting of pipes and cylindrical parts, surface
preparation to rubberizing.
Desanding and final blast cleaning of castings(especially brittle
parts and parts susceptible to impact damage)
Desanding of forging or hardened parts
Shot peening for surface hardening
Deburring of plastic parts
- Compact design and user friendly
- Effective high blast cleaning performance
- Economic abrasive consumption,reliable cleaning and dust
- Broad range of machine type and various option
- Easily integrated into production line
- Highly safe operation
- Maintenance friendly
>1.> What is the target market for this machine ?
The Blaster is designed for customers who require a more
sophisticated method than just manual cleaning in preparation for
further processing or painting.
2. What type of abrasive media does it use ?
The Blaster is designed to use round steel shot. The shot is
recycled inside the system and gets smaller and smaller during the
blasting process, until it is completely consumed. Approximately
two tons are required for start-up, and approximately 20 pounds are
consumed per blasting hour. Replenishment is easily done as needed.
3. What utilities are needed to run the Blaster ?
The electrical system runs on three-phase input and a transformer
will be provided for your supply voltage if required. Clean and dry
compressed air supply is also needed.
4. What does it cost to operate ?
The highly efficient turbines require much less power that
competitor's shot blast machines. Including abrasive consumption,
power consumption and maintenance, the total operating cost
averages around $20 per hour in US. When comparing this to your
current methods, keep in mind that the Blaster is at least 4 to 5
times as productive as manual cleaning and only one operator is
required to load and run the machine while it is working. Labor
costs are much lower, plus you will have a huge amount of extra
capacity for cleaning.
5. Are there any special operator skills required for the Shot
No, once the machine is installed and adjusted by our technician,
running the machine consists of merely switching it on and setting
the speed dial for the desired surface finish. Maintenance is