Home Companies SANHE 3A RUBBER & PLASTIC CO., LTD.

Red Color Close Cell Silicone Heater Pad , Silicone Heat Rubber Pad

SANHE 3A RUBBER & PLASTIC CO., LTD.

Contact Us

[China] country

Trade Verify

Address: 45 Hualian Golden Street, Sanhe Hebei China

Contact name:Shiguo Han

Inquir Now

SANHE 3A RUBBER & PLASTIC CO., LTD.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Red Color Close Cell Silicone Heater Pad , Silicone Heat Rubber Pad

Country/Region china
City & Province hebei
InquireNow

Product Details

Red Color Close Cell Silicone Heater Pad , Silicone Heater, Silicone Heat rubber pad

 

 

Description of heating pad element silicon rubber heater

Silicon rubber heater is a kind of thin film which heats upon electrified, in a standard thickness of 1.5mm, Adopting nickel chrome wires or 0.05 mm~0.10mm thick nickel chrome foils etched to some certain shapes, the heating component is wrapped with heat conducting and insulating materials on both sides, and completed in high-temperature die forming and aging heat treatment. Due to its high reliability, the product is highly competitive when comparing with other electric heating film products which normally have paste materials such as graphite paste or resistor paste, etc. coated on insulation materials. As a kind of soft red film which can be applied closely on different curved surfaces, the silastic heater can be fabricated in varies shapes and powers.
 
1. Fast heating with a coefficient of heat conductivity of only 1W/m.k. Due to its small thermal capacity, prompt turn on/off can be achieved.
2. High thermal efficiency: The temperature of electric heating film itself is only tens of centidegrees higher than that of the liquid when heating, which is 2-3 times energy saving than ordinary electric stoves.
3. Water, acid and alkali resistance, high-strength of electric insulation.
4. High mechanical strength with 100kg/cm² mechanical pressure.
5. Small size: Small space occupied when applying this heating product.
6. Easy application: Its self-insulation and free-of-open-fire property greatly help simplify the techniques of heat preservation and thermal insulation.
7. Its wide range of temperature,-60°C~250°C, can not be simply achieved by other electrical appliances.
8. Long service time: Under normal use, the product almost can be permanently and continuously used because nickel and chrome materials are durable to any corrosion, and the silastic has a high surface resistance up to 100kg/cm², which is uncomparable for any other electric heaters.
9. Made in any size, the temperature of the product can be precisely adjusted by temperature controller.
Technical parameters:
 
 
Specification:
 
MaterialSilicone + Wire
Voltage220-240V
Cable4Cores, 0.5m length
Power350W
Electric thermostatK, NTC, PT100 Sonde


Uniform heating to 220 degree C
Easy to install
Heater width to 48 inches(1.2 m)
Mount to flat or curved surfaces

 

Hot Products

SBR Sheet , SBR Sheeting , SBR Roll , SBR Gasket , SBR Rubber Sheet Thickness 0.5 - 50mm SBR is a ...
Neoprene Sheet , Neoprene Sheeting , Neoprene Roll , Neoprene Gasket , Neoprene Rubber Sheet ...
NBR Rubber Sheet , NBR Sheet , NBR Rolls , NBR Gasket , NBR Washer , Industrial Rubber Sheet Details...
Industrial use anti slip floor mat round button rubber ground sheet Generally, floor are easy to get ...
Black NBR diaphragm, NBR fabric, NBR Rubber Sheet Insert 1-2PLY Fabric for Industrial Seal ...
FKM rubber sheet , FKM sheet , FKM rolls , Industrial Rubber Sheet , Tensile Strength 6-12Mpa FKM ...