|
[China]
Trade Verify
Address: 45 Hualian Golden Street, Sanhe Hebei China
Contact name:Shiguo Han
SANHE 3A RUBBER & PLASTIC CO., LTD. |
|
Verified Suppliers
|
|
|
Widely used in industries of electrical, computer, chemical, high temperature areas, aerospace, military& transmission system
High quality transparent PTFE tubing
1. Anti-corrosion
2. Antilflaming,
3. High insulation,
4. Anti high temperature
Products
High quality transparent PTFE tubing
Forbest manufacturing Co.ltd offers a wide range of standard size
products and precision custom PTFE Tubing. Often referred to as
PTFE Tubing, PTFE Tubing has become the gold standard in industries
requiring the ultimate in lubricity, high temperature use, chemical
resistance, biocompatibility, and precision extruded
tolerances.
Main Properties
Very Lubricious - Lowest coefficient of friction of any polymer
Working temperature range( 260° C) to (–270° C)
Chemically Resistant (all common solvents, acids and bases)
Chemically Inert
Low extractable
Excellent Dielectric Insulation Properties
More Properties of PTFE
These properties are most of many reasons of PTFE is used in
medical applications, aerospace, analytical sciences, and other
demanding applications.
Character
| PROPERTY | zest Method | Unit | Specification Requirements | |||
| Specific Gravity | ASTM D792 | g/cm3 | 2.16 | |||
| Tensile strength | ASTM D638 | Mpa | 24.5 | |||
| Ultimate Elongation | ASTM D638 | % | 350 | |||
| Flexural Modulus | ASTM D790 | Mpa | 490 | |||
| Impact Strength | ASTM D256+23°C-54°Cj/m | -No break-107 | ||||
| Hardness | ASTM D2240 | Shore D | 55 | |||
| Coefficient Of Dynamic Friction | 0.1 | |||||
| Melting Point | °C | 327 | ||||
| Flammability | UL 224 | VW-1 | ||||
| Dieletric Constant At103-106HZ | ASTM D150 | 2.1 | ||||
| Ddissipation Factor At 106 HZ | ASTM D150 | 0.0002 | ||||
| Arc Resistance | ASTM D495 | S | > 300 | |||
| Volume Resistivity | ASTM D257 | Ω.cm | > 1018 | |||
| Weahter Resistance | Weather-o-meter (2000h) | No break | ||||
| Solvent Resistance | ASTM D543 | Excellent | ||||
| Chemical Resistance | ASTM D543 | Excellent | ||||
Standard Size
| SIZE | Inside diameter(mm) | Tolerance(mm) | Outside diameter(mm ) | Package (M/ROLL) | ||
| S | T | L | ||||
| 30AWG | 0.30 | ±0.06 | 0.76 | 0.76 | 0.60 | 305 |
| 28AWG | 0.38 | ±0.06 | 0.84 | 0.84 | 0.68 | 305 |
| 26AWG | 0.46 | ±0.06 | 0.92 | 0.92 | 0.76 | 305 |
| 24AWG | 0.56 | ±0.06 | 1.16 | 1.06 | 0.86 | 305 |
| 23AWG | 0.66 | ±0.06 | 1.26 | 1.16 | 0.96 | 305 |
| 22AWG | 0.71 | ±0.06 | 1.31 | 1.21 | 1.01 | 305 |
| 21AWG | 0.81 | ±0.06 | 1.41 | 1.31 | 1.11 | 305 |
| 20AWG | 0.86 | ±0.06 | 1.66 | 1.46 | 1.16 | 305 |
| 19AWG | 0.96 | ±0.07 | 1.76 | 1.56 | 1.26 | 200 |
| 18AWG | 1.07 | ±0.08 | 1.87 | 1.67 | 1.37 | 200 |
| 17AWG | 1.19 | ±0.08 | 1.99 | 1.79 | 1.49 | 2500 |
| 16AWG | 1.34 | ±0.09 | 2.14 | 1.94 | 1.64 | 153 |
| 15AWG | 1.50 | ±0.10 | 2.30 | 2.10 | 1.80 | 153 |
| 14AWG | 1.68 | ±0.10 | 2.48 | 2.28 | 2.08 | 100 |
| 13AWG | 1.93 | ±0.10 | 2.73 | 2.53 | 2.33 | 100 |
| 12AWG | 2.16 | ±0.10 | 2.96 | 2.77 | 2.56 | 100 |
| 11AWG | 2.41 | ±0.13 | 3.21 | 3.01 | 2.81 | 100 |
| 10AWG | 2.69 | ±0.13 | 3.49 | 3.29 | 3.09 | 100 |
| 9AWG | 3.00 | ±0.13 | 4.00 | 3.76 | 3.40 | 100 |
| 8AWG | 3.38 | ±0.13 | 4.38 | 4.41 | 3.78 | 100 |
| 7AWG | 3.76 | ±0.14 | 4.76 | 4.52 | 4.16 | 100 |
| 6AWG | 4.22 | ±0.15 | 5.22 | 4.98 | 4.72 | 100 |
| 5AWG | 4.72 | ±0.16 | 5.72 | 5.48 | 5.22 | 50 |
| 4AWG | 5.28 | ±0.17 | 6.28 | 6.04 | 5.78 | 1m/stick |
| 3AWG | 5.94 | ±0.19 | 6.94 | 6.70 | 6.44 | 1m/stick |
| 2AWG | 6.68 | ±0.19 | 7.68 | 7.44 | 7.18 | 1m/stick |
| 1AWG | 7.46 | ±0.20 | 8.46 | 8.22 | 7.96 | 1m/stick |
| 0AWG | 8.38 | ±0.21 | 9.38 | 9.14 | 8.88 | 1m/stick |
