|
[China]
Trade Verify
Address: 45 Hualian Golden Street, Sanhe Hebei China
Contact name:Shiguo Han
SANHE 3A RUBBER & PLASTIC CO., LTD. |
|
Verified Suppliers
|
|
|
made by moulded or extruded with high quality polytetrafluoroethylene(PTFE) material. It is the best polymer material of chemical resistance in all knows plastic material. With excellent characteristics of corrosion resistance, weathering resistance, dielectric properties and lowest coefficient of fraction in all know solid materials in a wide range of practicable temperature from -180°C - +260°C and a wax-like surface to which anything hardly sticks. Ø4-9mm is made by paste extruded, Ø10-50mm is made by ram extruded, Ø50-300mm is made by moulded. It has the best electrical properties of all plastics. The electrical insulation used under various kinds of frequency, the seal liner of various kinds of corrosively medium, anti-sticking materials, lubrication material.
Specifications:
material: 100% virgin PTFE
quality: premium grade
color: white, black
surface: smooth
tensile strength: 20Mpa
hardness: 55+/-5shore D
elongation at break: 200%
density: 2.1-2.3g/cm3
break down voltage: 10KV/mm
temp resist: -180°C - +260°C
. Very Lubricious - Lowest coefficient of friction of any
polymer
. Working temperature range 500°F (260°C) to -454°F (270°C)
. Chemically Resistant (all common solvents, acids and bases)
. Chemically Inert
. Low extractable
. Excellent Dielectric Insulation Properties
The specification and permissible tolerance of PTFE Tubes
SFG-1:ID≤4mm,SFG-2≥4mm
Item | ID(inner diameter) (mm) | Tolerance of ID (mm) | Wall thickness (mm) | Tolerance of wall thickness (mm) | Length (mm) |
SFG-1 | 0.5, 0.6, 0.7, 0.8, 0.9, 1.0 | ±0.05 | 0.2 | ±0.05 | ≥200 |
0.3 | |||||
1.2, 1.4, 1.5, 1.6, 1.8 | ±0.08 | 0.2 | ±0.05 | ||
0.3 | |||||
0.4 | ±0.08 | ||||
2, 2.2, 2.4, 2.5, 2.6, 2.8, 3.0, 3.2, 3.4, 3.5, 3.6, 3.8, 4.0 | ±0.10 | 0.2 | ±0.05 | ||
0.3 | |||||
0.4 | ±0.08 | ||||
0.5 | ±0.10 | ||||
1.0 | ±0.15 | ||||
SFG-2 | 5, 6, 7, 8 | ±0.10 | 0.5 | ±0.08 | According to the customer's demand |
1.0 | ±0.10 | ||||
1.5 | |||||
2.0 | |||||
9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 25 | ±0.10~±0.20 | 1.0 | ±0.10~±0.15 | ≥200 | |
1.5 | |||||
2.0 | |||||
≥25 | ±0.25 | 1.5~2.0 | ±0.20 |
Note: The information above is just for your reference. The final
products depend on the customer's technical requirements.
