Home Companies Baoji Hengtong Electronics Co., LTD

ODM OEM Silicon Piezoresistive Pressure Sensor 5-10V Diaphragm Based Pressure Sensor

Contact Us

[China]

Trade Verify

Address: Building 4, No.195, Gaoxin Avenue, Weibin District, Baoji City, Shaanxi Province, China

Contact name:Merlin

Baoji Hengtong Electronics Co., LTD

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

ODM OEM Silicon Piezoresistive Pressure Sensor 5-10V Diaphragm Based Pressure Sensor

Country/Region	china
City & Province	baoji Shaanxi
Categories	Physical Measuring Instruments

Product Details

OEM HT26V 5-10V supply silicon pressure sensor core components factory

HT26V Piezoresistive silicon Pressure Sensor

Introduction of silicon pressure sensor core:

HT26V is a piezoresistive silicon pressure sensor core. It uses the piezoresistive effect of diffused silicon to measure the pressure of liquids and gases. Constant voltage power supply output is relatively standard, lower than normal HT19 height, suitable for special case assembly.

This product is a customized product, can be customized constant voltage power supply or constant current power supply, the height can be customized according to the field needs, and finally fully applicable to customer requirements.

10V supply pressure sensor core components factory

Product Features of silicon pressure sensor core:

Constant voltage supply and outputs standard signals
High reliability and excellent stability
The min height is 7mm, various structures can be customized

Applications of silicon pressure sensor core:

Applied in various industrial process sites.
including petroleum, chemical, metallurgy,power, and hydrology .
Used in marine and aviation industries
Suitable for hydraulic and pneumatic control systems.

Electrical performance of silicon pressure sensor core:

Power Supply: ≤10VDC (5-10VDC)
Common Mode Voltage Output: 50% of the input (typical)
Input Impedance:4KΩ~20KΩ
Output Impedance:2.5KΩ~6KΩ
Electrical Connection:100mm high-temperature wire,ribbon cable and pin connectors.

Performance Parameters of silicon pressure sensor core:
Measurement Range		Gauge(G)	10KPa,20KPa,35KPa,100KPa,200KPa,350KPa,1000KPa,2000KPa
		Absolute(A)	100KPaA,200KPaA,350KPaA,700KPaA,1000KPaA,2000KPaA
		Sealed(S)	3500KPaS,7MPaS,10MPaS
		Typ		Max	Unit
NonLinearity		±0.15		±0.3	%F.S
Repeatability		0.05		0.1	%F.S
Hysteresis		0.05		0.1	%F.S
Zero Offset Output		0±1		0±2	mV
Full Scale Output	≤20KPa	50±1		50±2	mV
	≥35kPa	100±1		100±2	mV
Zero Offset Temp. Drift	≤20KPa	±1		±2.5	%F.S
	≥35kPa	±0.8		±1.5	%F.S
Full Scale Temp. Drift	≤20KPa	±1		±2	%F.S
	≥35kPa	±0.8		±1.5	%F.S
Compensated Temp.	≤20KPa	0~50			ºC
	≥35kPa	0~70			ºC
Operating Temperature		-20~80			ºC
Storage Temperature		-40~125			ºC
Allowable Overload		3 times the full scale
Burst Pressure		5X the full scale
Long-term Stability		0.2 %			F.S/Year
Diaphragm Material		316L
Insulation Resistance		≥200MΩ 100VDC
Vibration		No change under conditions of 10gRMS, 20Hz to 2000Hz
Shock		100g,11ms
Response Time		≤1ms
O-ring Seal		Nitrile rubber or Fluoro rubber
Filling Medium		Silicon Oil
Weight		~25g
The parameters are tested under the following conditions: 10V @ 25ºC

Outline Construction of silicon pressure sensor core
Pressure Tube <3.5MPaS
Normal ≥3.5MPaS <40MPaS

Electrical connection and compensation

Selection Examples

Ordering tips

1. Pay attention to the fit between the core size and the transmitter housing during assembly to achieve the
required airtightness
2. During the assembly of the housing, ensure it is aligned vertically and apply even pressure to avoid jamming or damaging the compensation plate.
3. If the measured medium is not compatible with the core diaphragm and the housing material (316L), special instructions should be provided when placing the order.
4. Avoid pressing the sensor diaphragm with hands or sharp objects to prevent damage to the core due to diaphragm deformation or piercing.
5. Keep the pressure port of the gauge pressure core open to the atmosphere and prevent the entry of water, water vapor, or corrosive media into the core negative pressure chamber.
6. If there are any changes to the pin leads, follow the label on the actual core for reference.

FQA

1.Q: What are the features of your pressure sensor transmitters?

A: High precision, durability, and excellent performance. Customization available.

2.Q: Can I customize special specifications?

A: Yes, our engineers can tailor products to meet specific needs. We provide OEM and ODM service

3.Q: What is your production capacity?

A: Our manufacturing facilities can produce up to 30,000 pressure sensor transmitters per month, so we are fully capable of meeting the needs of large-scale orders. However, it is advisable to contact our sales team in advance to ensure smooth production and delivery scheduling
.

4.Q: What's the typical delivery period?

A: 5~8 working day for standard models. Customized products may vary.

5.Q: How are the products priced? Any discounts?

A: Competitive pricing with discounts for bulk orders or long-term partners
.

6.Q: What is the warranty of your products? And after-sales service?

A: Our warranty time is 24 months after shipment, and our after-sales will respond with your questions in 24hrs, remote instruction by PC network is always available.

company

Hot Products

Oem Silicon Digital Pressure Sensor 316L Stainless Steel Pressure Transmitter

Contact Us

Baoji Hengtong Electronics Co., LTD

ODM OEM Silicon Piezoresistive Pressure Sensor 5-10V Diaphragm Based Pressure Sensor

Product Details

OEM HT26V 5-10V supply silicon pressure sensor core components factory

Hot Products

Oem Silicon Digital Pressure Sensor 316L Stainless Steel Pressure Transmitter

BP157 Silicon Diaphragm Pressure Sensor Stainless Steel Pressure Transducer 4-20mA

BP9325 Diffused Silicon Pressure Sensor Stainless Steel Piezoresistive Pressure Transmitter

Absolute Gauge Piezoresistive Pressure Transducer Oil Water Pressure Transducer Sensor

Copper Tube Silicon Pressure Sensor Gas Pressure Measurement Sensor

HT-IQ Flush Mounted Sensor Clamp Tightly Sealed Diaphragm Pressure Transducer