|
[China]
Trade Verify
Address: 5F, Building D South, Jinshenghui Science Park, No. 3, Dafu Road, Fucheng Street, Guanlan, Longhua District, Shenzhen, China
Contact name:Michelle Guo
E-link China Technology Co.,LTD |
|
Verified Suppliers
|
|
|
48 Ports Gigabit SFP Managed Fiber Switch With 6-Port Combo Ethernet + 4-Port 10G SFP
48 Port Managed Fiber Switch Advantages
► Hardware routing, wire-speed L3 switching packet forwarding rate up to 130.94Mpps
► Can be deployed in the core of MAN, and provides several final 1 km technology
► Provide DOS, distributed denial of service, deception and virus defense
► Support IEEE802.1x, provide port-based user authentication, network shield, safety control, and strategy control technology
► Restrict maximum number of connected hosts port, with multi-channel Ethernet interface binding, increasing bandwidth and system redundancy
48 port Gigabit Managed Fiber Switch Overview
FS48G6C4X Series Switches provide a complete IPv4/IPv6 routing, including tunnel and IP multicast. The user can set all kinds of functions of switch through the Web, SNMP and so on. FS48G6C2X Series Switches support DOS defense, Qos, RSTP, MSTP, VLAN, Port Security, a storm suppression, ACL access control and other functions, which is very suitable for the aggregation application of large-scale network and the core application of medium and small-sized network.
48 Port 10/100/1000Mbps SFP Fiber Managed SwitchTechnical Indexes
Product Type | L3 Managed 48G SFP+6GE Combo+4x10G SFP Fiber Switch |
Fixed port | 48-Port Gigabit SFP Fiber Port + 6-Port Combo TP + 4-Port SFP+ |
Backplane bandwidth | 176Gbps |
Packet forwarding rate | 130.94Mpps |
Processor | RISC 600MHz |
Flash memory capacity | 8MB |
The memory capacity | 128MB |
Address table | 32K |
Product characteristics | |
Spanning tree | Support STP, RSTP, MSTP Support PVST/PVST+ |
VLAN | Support port-based VLAN |
Support MAC based VLAN | |
Support 802.1Q tag VLAN | |
Support Super VLAN | |
Support for Private VLAN | |
Support GVRP Dynamic VLAN Configuration | |
Support QinQ and Smart QinQ | |
Support Voice VLAN | |
Flow control | Based on a standard IEEE 802.3x flow control |
Using IEEE 802.1Qbb priority flow control | |
Support CAR Function | |
Broadcast control | Restraining broadcast storm, stop sending so long as reaching a critical point |
Multicast control | IGMP Snooping multicast message automatic monitoring |
Port binding | Each group of a maximum of 8, while support 32 group |
Port mirroring | Support based on flow classification mirroring and port mirroring |
Stacked | Stacked 16 hard, soft stacking 32 Using clustering techniques, with a unified centralized management of IP address to do address resource saving |
Routing management | Static routing |
Strategy routing | Support based on IP strategy routing |
The proxy function | Support Proxy ARP, DNS Proxy |
Redundancy backup | Support for VRRP, HSRP Hot Standby Router Protocol |
Safety characteristics | Port Security (Port Security) function Hardware support for IP ACL, MAC ACL, Vlan ACL User classification management and password protection |
Quality of service | IEEE 802.1Qau congestion mechanism |
Network management | SNMP v1/v2/v3 |
Physical characteristics | |
Appearance size | 442mm × 285mm × 44mm |
Power characteristic | AC 110-240V adaptive, 47-63Hz, 1A/230V, RPS power hot backup |
Power | 80W |
Indicator lamp | Power indicator, indication of system, connecting / transceiver instructions |
Environment | Operating Temperature: 0-50 ℃ Relative Humidity: 0-90% no condensation |
48 Ports Gigabit SFP Fiber Switch With 4 Ports 10G SFP Ordering Information
Model | Description |
LNK-FS48G6C4X | L3 Managed 48-Port Gigabit SFP + 6-Port Combo Ethernet + 4-Port 10G SFP+ Fiber Switch |
