|
[China]
Trade Verify
Address: 5F, Building D South, Jinshenghui Science Park, No. 3, Dafu Road, Fucheng Street, Guanlan, Longhua District, Shenzhen, China
Contact name:Michelle Guo
E-link China Technology Co.,LTD |
|
Verified Suppliers
|
|
|
10/100/1000M PDU Power Distribution Unit 2 In 1 POE Surge Protector
10/100/1000M POE Ethernet + Power 2 in 1 Surge Protector
Advantages
► POE Ethernet surge protector.
► Suitable for application of wireless AP, network cameras, network switches and other communications equipment supply, network signal line surge protection, integrated design, easy installation.
► Adopt power supply + signal POE surge protection integrated design.
► Use high quality main component with excellent performance.
► Small insertion loss, good transmission rate.
► Low residual voltage, efficient surge protection effect.
► Fast response, stable performance, reliable working.
Technical Indexes
| LNK-SPD1000 Series | POE Network section | Power Supply Section |
| Maximum continuous operating voltage UC | 60V | 82 V |
| Max Surge Discharge current | 6KA (8/20us) | |
| Peak Pulse Current | 100A (10/1000us) | |
| Line-line voltage protection level in (UP) | 60 V | 0.4 kV |
| Line-PE voltage protection level in (UP) | 600 V | 0.4 kV |
| Line-line voltage protection level 1 kV/μs C3 (UP) | 60 V | 0.15 kV |
| Line-PE voltage protection level 1 kv/μs C3 (UP) | 600 V | 0.15 kV |
| Line-line voltage protection level 1.5kV@10/700μs B3 (UP) | 60 V | 0.4 kV |
| Line-PE voltage protection level6kV@10/700μs B3 (UP) | 600 V | 0.4 kV |
| Protection Mode | Differential & Common Mode | |
| Insulation Resistance | >1000 MOhm | |
| Shunt Capacitance | <25 pF | |
| Operating Temperature range | -40 °C ~ + 75 °C | |
| Protection class | IP 20 | |
| Mounting method | Mounting Flange | |
| Connector | RJ45 | |
| Even take over the foot. | 1/2, 3/6, 4/5, 7/8 | |
| Grounding mode | Dedicated grounding terminals | |
| Grounding Wire | 14 AWG or higher | |
| Shell material | Aluminum alloy | |
| IEC Standard | 61000-4-5, 61643-21 | |
Overview
This product is applicable to the lightning and electric surge protection of the Ethernet signal circuit, control wiring and power circuit of monitor camera. It can combine the above mentioned lightning protection function into one. Its housing adopts integrated iron structure with small volume and ultra low residual pressure output. Design of this product considers fully that the electrode capacitance and distributed capacitance would lessen data signaling with small insertion loss, which can satisfy the requirement of video signal transmission, and can response to the transient over voltage quickly.
Ordering information
| Model | Description |
| LNK-SPD1000 | 10/100/1000M Ethernet + Power 2 in 1 Surge Protector |
