Touch-Screen Wireless Stereo Bluetooth Earphone New Upgrade 5.0 Chip ES01

Touch-Screen Wireless Stereo Bluetooth Earphone New Upgrade 5.0 Chip ES01
 

Touch-controlled Real Wireless Stereo Wireless Headset User Handbook
Model  ES01
 
 
Earphone accessories
Big earmuffs
Middle earmuffs
Small earmuffs
Microphone / breathing light hole
Charging metal contacts
Battery indicator
Left ear charging indicator
Charging Metal Bullet Needle
Headphone Charging/Placement Warehouse
Right ear charging indicator
 
 
 
Start using
First using
Put left and right headphones into the charging cabin for activation.
Note: Headphones will be charged when they are put into the charging cabin. The display area of the charging cabin will show the current headphone power. The headphone indicator will indicate the charging status. If you can't charge, please insert a USB data line to charge the charging cabin. (Detailed operation is explained later.)
Binaural pairing
 
After putting the headphones into the charging cabin for activation, take out two headphones. The headphones automatically turn on with the prompt sound "power on", then the two ears will automatically form a team. After the team is successful, the left headphones will have the prompt sound "left channel", and the right headphones will have the prompt sound "right channel", at which time the two ears will enter the matching state. Bluetooth mobile search device "ES02" and link, the link is successful with the prompt sound "link success", you can complete the mobile phone and binaural links.
 
Note: You have 3 minutes to complete the link between your ears and your mobile phone, otherwise the headset will quit the matching mode and shut down automatically. Re-placing the headphones back into the charging cabin and removing them again can activate the pairing again.
 
Monaural pairing
Take out a headphone from the charging cabin, and the headphone will voice "power on" and then prompt "paring" to enter the single ear matching mode. At this time, the Bluetooth search device "ES02" and link. When the link is successful, the link between the mobile phone and the single ear can be completed.
 
Note: When using single ear mode, make sure that the other earphone is put back into the charging cabin or in shutdown mode.
Reset system
 
If the misoperation of headphones causes two headphones to be unable to form a team or link to the mobile phone, the system can be reset to restore the factory settings in the following way. In the shutdown state, both ears press the touch button for 10 seconds at the same time until the indicator lights are turned off and the headphones are turned off automatically. Press the double-ear touch button for about 1 second to turn on, the indicator flashes, and the double-ear will automatically form a team successfully. At this time, the system has been reset, and the mobile phone can search for headphones for links.
 
 
Wear headphones correctly
Place earphones with ear caps in the ear canal and rotate gently until they fit comfortably without falling off. The wrong way to wear headphones can affect the signal and sound quality.
The right way of wearing
 
 
The wrong way of wearing
Tip: To achieve the best sound effect, choose ear caps that completely seal your ear canal. It is possible that different sizes of earcaps are needed for the left and right ears.
Display screen lighting mode
The display will be lit up in the following circumstances, each time for half a minute, and then will be automatically extinguished.
 
When the left or right ear is put in/out of the charging cabin
When charging cabin charging wire is inserted/pulled out
Charging ways
Charge headphones
Put the headphones in the charging cabin (metal contacts are relative), the indicator lights will be on for a long time during charging, and the indicator lights will be off after charging.
 
Charge the headphone cabin
Charge the headphone cabin with the distributed USB data line. When charging begins, the display will display the power of the main battery, which will be extinguished after 30 seconds.
 
1. The host and co-machine can switch automatically; it is able to match with any earphone directly; operation is more convenient.
2. Flexible switching between one and two ears;
 
Functional Essentials
Long-press
Boot up
Method 1: After the headphone is removed from the headphone compartment, it will start automatically.
Method 2: When the earphone is off, press the touch button for about 3 seconds.
Shutdown
Method 1: Put the headphones in the headphone cabin and shut down automatically.
Method 2: When the earphone is on standby, press the touch button for about 3 seconds to turn off the phone.
Tip: When headphones are playing music or talking, it is not allowed to turn off manually. This function is invalid.
Answer/hang up the phone
When the phone rings, briefly pressing the left and right headset touch buttons to make the connection, and briefly press again to hang up.
Single-click
 
 
Rejection of calls
When the phone rings, long press the right headset touch button for about 3 seconds to reject the cal.
Headset and mobile phone call transfer
During the call,long pres the right headset touch button for about 3 seconds to switch.
Turn mute on/off
During the call, double-click the right headset touch button to turn on mute; double click again to turn off.
Double-click.
Pause /play
When playing music, briefly press the left and right headset touch buttons to pause; press again to resume playing.
Single-click
Switch up and down
When playing music, double-click the left ear touch button to switch to the previous song, double-click the right ear touch button to switch to the next song.
Volume plus/minus
When playing music, long press the left ear touch button to decrease the volume, long press the right ear touch button to increase the volume.
Tip: This feature is only available when the music is playing.
Long-press
Turn on voice assistant
In standby mode, click the right headset touch button three times in succession. Mobile voice assistant can be activated (Siri of Apple system, Android system requires mobile phone’s function support)
Three consecutive clicks
 
Chinese and English tone switching
In the standby state, you can switch between Chinese and English prompt voice by three consecutive clicks of any left and right earphone touch buttons.
Three consecutive clicks
 
A When white light flashes three times, it starts up; when orange light flashes three times, it turns off.
B When white light flashes, it is waiting for connecting to the cell phone that has been connected before.
C When orange and white lights flash alternately, it is waiting for linking to Bluetooth of the cell phone.
D When light off, successful connect to mobile phone.
 
Product parameters
Model:ES01
Communication distance: about 20 meters (under barrier-free environment)
Bluetooth version: V5.0+EDR
Headphone working time: about 4 hours
Headphone standby time: about 50 hours
Charging time: about 2 hours
Type of battery : Polymer lithium ion battery
Support Agreement: HFP/HSP/A2DP/AVRCP
Headphone battery capacity: 3.7V 50mah
Headphone charging time: about 1 hour
Headphone compartment battery capacity: 3.7V 600mah
Headphone compartment charging time: about 2 hours
Note: All technical information is subject to actual performance.
 
Tips
1.Please read the instructions carefully before using the product and keep it in a safe place.
2.For the first time, please fully charge this product first.
3.If the product has not been used for a long time (more than 1 month), please charge it
4.You must select a charger from a regular manufacturer to charge it to avoid product damage.
5.If the phone cannot search for a Bluetooth headset, make sure the Bluetooth headset is paired. If the mobile phone program is wrong, please restart the phone and try again; if the Bluetooth headset program is wrong, please restart the Bluetooth headset or restore the factory settings and try again.
 
Warning
 
1. Do not dismantle or repair the modified earphone for any reason, otherwise it may cause fire electronic breakdown or even completely damage the product.
2. Do not place the device in an environment where the temperature is too low or too high (below 0 degrees or above 45 degrees)
3. Please avoid using the device indicator near the eyes of children or animals.
4. Do not use the device during thunderstorms. Thunderstorms can cause the device to work abnormally and increase the risk of electric shock.
5. Do not wipe this product with oily and other volatile liquids.