Home Companies Shenzhen Olycom Technology Co., Ltd.

1G 10G Unmanaged Copper SFP+ Fiber Ethernet Media Converter DC12V With DIP

Contact Us

[China]

Trade Verify

Address: 4/F, 2-3 Building, Tongfuyu Industrial Zone, Aiqun Rd, Shiyan, Baoan District, Shenzhen, China

Contact name:Sales

Shenzhen Olycom Technology Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

1G 10G Unmanaged Copper SFP+ Fiber Ethernet Media Converter DC12V With DIP

Country/Region	china
City & Province	shenzhen

Product Details

Mini 10 Gigabit Copper and Fiber Media Converter Unmanaged

Introduction of 10G media converter

TA810-10G supports two types media for network connection such as 10G Base-T and 10G SFP+ and realizes 10 Gigabit Ethernet communication across fiber via the SFP or SFP+ port with intelligent configuration features such as link fault pass-through, auto laser shutdown, port speed setting, etc.
The media converter is designed with a switch controller and buffer memory that connects two types segments to operate smoothly.
Auto-Negotiation – automatically determines the best connection speed
1/2.5G/10Gb LAN to 10G SFP+ port supports Singlemode and multimode, single or dual fiber
With external power unit, it provides good stability and reliability.

Key Features of unmanaged fiber Ethernet converter

Support 10K Bytes Jumbo Frame
Transparent Transport and very low delay
Support ITUT prescribed DWDM/CWDM wavelength
Support to install into 1U Rack 12 slot Rack
Full State Led display
Easy installation
UTP cable length detection(only RJ45 interface)

Specification of SFP+ fiber optic converter

Transmission Speed	10M/100M/1.25G/2.5G/5G/10Gb/s
Protocols	IEEE802.3an(10Gbase-T) ,IEEE802.3ae(10Gbase-SR/LR/ER/ZR)
Interface Type	Type: RJ45 To/From SFP+
Transmission Distance	Up to SFP module (Max 40Km) Up to SFP+ module (Max 80Km) Up to SFP module (Max 40Km) Up to XFP module (Max 80Km) 10Gbase-T: 100meters Cat .6a cable
Maximum Packet Forwarding Rate	14,880,950/S
Power Requirement	Standalone: DC 5-12V (external power) Power consumption: ≤5W
MAC Address	2K
Jumbo Frame	10K
Cable Type(Fiber)	Multimode 50/125µm, 62.5/125µm Single-mode 9/125µm
Cable Type(Copper)	UTP Cat 5, 5e, 6,6a Cable
DIP Switch	LFP/ALS/Media Conversion Mode(see bottom table)
LED Indicatiors	TP/LNK,SPD,FX/LNK,PWR
Work Environment	Operating Temp: 0~ 50 ℃ Storage Temp: -10~ 70 ℃ Humidity: 5%~90%(non-condensing)
Housing	Metal, IP30
Dimension	Standalone :60 (W) x 20 (H) x 90 (L) (mm)
Weight	0.12kg

Function	Status	Description
LFP	Off	LFP Disable
LFP	On	LFP Enable
ALS	Off	Disable
ALS	On	Enable
Media Conversion Mode	Off	1:TP=10G,FX=10G 2:TP=10/100/1000M, FX=1G
	On	1:TP=10G,FX=10G 2:TP=10/100/1000M, FX=1G
	Off	TP=10/100/1000M/10G, FX=10G
	On	TP=10/100/1000M/10G, FX=10G

Notes:

1. LFP: Link fault pass through, When enabled, the UTP receiver is passed to the fiber transmitter to make the media converter appear transparent to the connected end devices. It uses link fault passthrough to indicate when far-end fault issues occur. If a fault occurs, the end device indicates a failure for troubleshooting.

2. ALS: automatic laser shutdown is a procedure to automatically shut down the laser when there is no input light and stop emitting optical signals.

3. FX: Optical Fiber Port

4. FX Reset: When enabled, the PoE will restart if there is no data input to the UTP receiver.

Application of fiber media converter

Connection between fiber to copper 1.25G~10Gbps Ethernet equipment function as fiber-to-copper media converter for long distance transmission
Media converter for network backbone(SAN, LAN, MAN)
Can be applied in Telecommunication room, R&D laboratory, Data center, and etc.

Dimension of 10G commercial optical converter