Jinan Qihang CNC Equipment Co., Ltd. |
|
16x200mm CNC punch cutting machine for high and low voltage switchgear
This machine has a national patent, processing principle and processing methods of new, different from the traditional concept of processing, using 2 axis digital control can be a fixture on the bus to realize all kinds of punching, cutting and embossing etc.. Patented technology to abandon the traditional product operation, complicated control (need at least 3-5 axis control of traditional products) fault and other shortcomings, using a unique digital control method has the advantages of simple operation, easy to use, few fault points, convenient maintenance, high efficiency, low precision, low carbon and environmental protection. Only when the operation to be processed to a bus bar clamp clamp in place, with the touch screen programming and related operations can be completed by punching, cutting, embossing for busbar etc., the machine adopts electronic pneumatic clamp, repetitive positioning technology makes the unique feeding process does not limit the parent line length, location the accuracy of 0.1mm. The stamping part adopts 6 mode combination mode, which has 4 punching holes, 1 cutting and 1 embossing dies. The principle of shear is cut and cut, and the cut surface is smooth and smooth. After the starting of the processing procedure, no manual intervention is needed, and the automatic production of the finished product can be completed, and the product can be directly transferred into a sequence, and no need of semi-finished single sequence stacking, waste collection and recycling, no waste discharge, safety and environmental protection. With CNC busbar bending machine combination become CNC machining center, machining efficiency ten times than conventional products.
products parameters:
Name | unit | parameter | |
Nominal Force | KN | 500 | |
X-axis positioning speed | m/min | 30 | |
Maximum stroke of X-axis | mm | 1200 | |
Maximum stroke of Y-axis | mm | 950 | |
Stroke of Pressure cylinder | mm | 80 | |
quantity of mould | Punching mould | pcs | 4 |
Cutting mould | pcs | 1 | |
Embossing mould | pcs | 1 | |
quantity of control axle | 2 | ||
accuracy of hole spacing | mm/m | <±0.10 | |
Maximum diameter of punching | mm | Φ25 | |
Maximum embossing area | mm2 | 200×60 | |
Maximum size of the material(LXWXH) | mm | 6000×200×16 | |
oversize(LXWXH) | mm | 6600×3200×1500 | |
Maximum hydraulic power | Mpa | 31.5 | |
total power | KW | 9.5 | |
Weight | T | 2.2 |
Main parts:
name | brand | quantity |
Motor | yanran-china taiwan brand | 1 |
Hydraulic pump | yanran-china taiwan brand | 1 |
Solenoid valve | yanran-china taiwan brand | 1 |
Electromagnetic relief valve | yanran-china taiwan brand | 1 |
Electrical components | Schneider-german brand | 5 |
Linear guide, ball screw | SKF-sweden brand | 3 |
AC contactor | Schneider-German brand | 2 |
Thermal relay | Schneider-German brand | 1 |
PLC | Huichuan-china brand | 1 |
Grating ruler | Xinhe-china brand | 1 |
Touch screen | Pingtong-china taiwan brand | 1 |
servo motor | Huichuan-China brand | 2 |
bearing | SKF-sweden brand | 6 |
Mould and other parts together with the machine:
Punching mould | 8pcs |
scissors | 1pcs |
Embossing mould | 1pcs |