Jinan Qihang CNC Equipment Co., Ltd. |
|
30 ton CNC busbar bending cutting punching machine for power distribution box
Punching unit:
1. Punching uint use thimble design, make the processing more stable, the processing spare parts more accurate.
2. The machine use turret punching work table, use 6 mould turret keep the up mould and down mould center point is on a straight line, increase the concentricity of the mould, highly increase the life time of the punching mould.
3. The turret use gear structure make a good sight for the user.
4. When you operating the machine dont need change the moulds frequently, saving time and improve the working effency.
5. Design of polyurethane pad + spring, Make the die retreating faster.
6. The bus processing machine series CNC punching unit with two operation modes include manual button and pedal switch, clear, simple and quick.
7. The precision 60mm large diameter hydraulic column in the industry is used to make the punching force more stable and powerful, and the effect of the production work is better.
Shear interpretation:
1. the general file style cut: cut flat bed angle, no burr, beautiful appearance; no shear waste.
2. use the elastic polyurethane pad: the cutting effect of the workpiece is better.
3. this series of multi position bus machine adopts two kinds of operation methods including manual button and foot switch. It is simple and quick at a glance.
Bedning unit:
1 . The CNC busbar machine bending unit with Independent workbench, three working position can work at the same time and donot influence each other.
2 . change the bending mould, you can bending the material.
3 . The bending unit is CNC and PLC coontrol, with angle mode and limit mode two operation mode.
4 . bending unit is machined in horizontal type, it is safe and convenient
5 . closed whole frame structure: the bending of copper and aluminum busbar and the more uniform embossing, and prolonging the service life.
6 . use the 45 steel heat treatment of bending die: super hardness, durable and durable.
7 . this series of multi position bus machine adopts two kinds of operation mode including manual button and foot switch. It is simple and quick at a glance.
Type | 303E-2 | |
Punching processing | Maximum punching force(KN) | 300 |
Punching processing scope | Φ4.3 - Φ25 | |
Maximum processing thickness(mm) | 12 | |
Maximum processing width(mm) | 150 | |
Shearing processing | Maximum thickness of shearing(mm) | 12 |
Maximum width of shearing(mm) | 150 | |
Bending processing | Maximum bending force(KN) | 300 |
Maximum width of bending(mm) | 150 | |
Maximum thickness of bending(mm) | 12 | |
Vertical bending processing | Maximum width of bending(mm) | 100(10 thickness of copper) |
Minimum bending angle | 90˚ | |
Embossing function | √ | |
Oversize(mm) | 1800 x 1400 x 1480 | |
Second workbench size(mm) | 800*420 | |
Main motor power | 3*4KW | |
Total weight | 1.4 |
Punching mould: 8PCS
Shears:1PCS
Horizontal mould:1SET(3PCS)
Vertical mould:1SET
Repair tools:
1, Spare seal ring 1 set
2, Foot switch 3PCS