Active Member
|
[China]
Address: Yipeng Industrial Part, 2 Xingli Road, Yixing, Jiangsu, 214200, China
Contact name:Green Lu
NEW LANDLE TECHNOLOGY CO.,LTD |
|
|
XRotor Pro X6 6215 Brushless Motor 180KV with 80A ESC, 2388 Propeller, Match Carbon Fiber Tube Arm 28/30mm
Integrated & Ready-to-use Propulsion System
The X6 propulsion system, which integrates motor, ESC, propeller
and motor mount (with the optional 30-to-28 tube adapter, it’s
compatible with 28mm&30mm diameter carbon fiber arm tubes)
together, is easy to mount and use.
Note: with the foldable 2388 propeller, the propulsion system is
capable of carrying the load of 3~5KG (that is 18~30KG for a
hexacopter ).
FOC-based PMSM Algorithm Perfect Propulsion System
The FOC (Field Oriented Control)-based PMSM (Permanent Magnet
Synchronous Motor) algorithm, an optimized algorithm for improving
the collaborative performance of the ESC, motor & propeller,
makes the motor-propeller more balanced and creates a propulsion
system features high stability, reliability and efficiency.
Note: comparing with the BLDC motors, the PMSM has a lot of
advantages like low noise, small size, high power density, low
pulsating torque, and high control precision.
Super Waterproof
The X6 propulsion system is waterproof to IPX7 standard. It’s
applicable to almost all the harsh working conditions (for
agricultural applications) like rainwater, pesticides, salt spray,
high temperature, sand and dust. Combined with the outlets at the
bottom of the motor mount.
(note: patented design), you can directly rinse the system with
fresh water after use.
High-brightness LED Indicator
The X6 propulsion system also contains a high-brightness LED indicator, you can choose the light color or disable it. It can provide the information about the working status of the system and send a warning when any abnormal issue occurs, that significantly improves the safety of the system.
High Thrust & Efficiency Propeller
The 2388 propeller made of special high-strength carbon fiber is solid and light, and guaranteesgreat consistency and excellent dynamic balance. The optimized aerodynamic shape combined with the optimized electromagnetic design adopted by the motor and the high efficiency FOC (Field Oriented Control) algorithm implemented by the ESC guarantee the high thrust & efficiency of the propulsion system.
Super Impact Resistance
The unique keel-like structure design adopted by the motor mount/ESC case optimizes heat dissipation, improves overall strength. In particular, it protects the motor parts and makes the motor highly impact-resistant. That greatly reduces the possibility of structure deformation/malfunction caused by drop or hit.
| Motor | 1 | ESC | 1 |
| Propeller | 1set | Motor Mount | 1 |
| Screws | 1set | LED Set | 1 |
| Tube Adapter | 1 | from 30mm to 28mm |
Specifications
Max. Thrust 12kg/Axis (48V, Sea Level )
Recommended LiPo Battery 12S LiPo
Recommended Takeoff Weight 3-5kg/Axis(48V,Sea Level)
Combo Weight 720g
Waterproof Rating IPX7
Operating Temperature -20℃~50℃
Motor
Outer Diameter 70mm
KV Rating 180KV
O.D of Carbon Fiber Tube φ30mm/φ28mm (*Tube Adapter will be Needed)
Bearing Imported Bearing
ESC
| Recommended LiPo Battery | 6-12S LiPo | PWM Input Signal Level | 3.3v/5v (Compatible ) |
| Throttle Signal Frequency | 50-500Hz | Operating Pulse Width | 1100~1940μs |
| Max. Input Voltage | 52.2V | Max. Input Current (Cont.) | 80 A(w/ Good Heat Dissipation) |
| BEC | Built in | Max. Peak Current (10s) | 100 A (w/ Good Heat Dissipation ) |
| Nozzle Mounting Holes | φ28.4mm-2*M3 | ||
Propeller
Diameter×Pitch 2388
Weight 91g (w/ Propeller Adpater, Single Blade: 36g)
Introduction
The XRotor Pro X6 brushless power system is a power system capable
of carrying a load of
3~5kg (per axis) for agricultural drones. It can provide the thrust
of up to 11.9kg and
match28/30mm carbon fiber tube arms. It’s waterproof and dustproof
to IPX7 standard and
resistant to rainwater, pesticides, salt spray, sand, dust, mud,
sandy soil, high temperature
and impact. It also features the algorithm used for optimizing the
FOC ESC &motor system
and making the system more balanced, multiple protections like
power-on self detection,
power-on abnormal voltage, over-current and motor lock-up, and the
real-time data output
function.
Attention
• Always keep your dr one away from crowd, high-voltage power lines
and obstacles, fly your
drone in accordance with relevant safety regulations.
• Never get close to the high-speed r otating propeller &
motor, otherwise you may get hurt.
• Check if all the parts ar e in good condition befor e use. If
there exists any damaged part,
please contact the factory for replacement.
• Check if any scr ew for connecting the parts is loose and the
motors ar e horizontal before
each flight.
• The bore diameter of the arm for the X6 power system is 30mm, if
you w ant to use the
28mm tube, then install the tube adapter (included in the product
box) into the projecting
tube on the motor mount first.
• You can change the light color of the LED set. In that case, you
need to disassemble the
light cover and slide the DIP switches accordingly.
• You can rinse the motor with fr esh water after each flight to
keep it clean.
Installation of the Power System
• The whole power system has been assembled befor e leaving the
factory, it’s ready-to-use
and you can directly mount it on your agricultural drone as per the
rotation direction
(CW/CCW) marked on the motor.
• The bore diameter (of the arm) is 30mm, if you want to use the
28mm tu be, then tube
adapter will be needed.
• The (Black/Red/White) tri-color cable is for outputting data
& updating ESC firmware, the
(White/Black) bi-color cable is the throttle signal cable, and the
yellow wire is the RPM
signal output wire.
• The data signal wir e is for outputting thr ottle input, throttle
output, motor RPM, input
current, output current, input voltage, capacitor temperature, MOS
temperature, and etc.
• The throttle range of the ESC is fixed at 1100~1940μs.
