1.5KW Power Welding Smoke Extractor , Wall Mounted Welding Fume Collector

Wall-amounted welding fume extractor system / dust collector/ smoke cleaner/soot purifier

Working principle

The vacuum pressure air flowing the blower generates enters the purifying chamber through the suction arm or pipe. The dust contained gas is purified in the purifying chamber through the separation of the filter cartridge. Through different ways of cleaning (manual cleaning or automatic cleaning) make the ash cake of accumulating in the surface of the filter fall into the fume drum. After cleaning, the clean air through the air duct is exhausted out by blower 

Product introduction

1. The purifying principle of wall-mounted welding fume extractor is the same as mobile type. The fume 

    extractor is suitable for fixed welding area, welding room, training school or workshop where the floor   

    space is insufficient, and can be mounted on the wall or pillar.

2. Wall-mounted extractor is controlled by an external control box which can be installed in a suitable

    location according to the needs.

3. Wall-mounted welding fume extractor can be connected to the flexible suction arm. In addition to the

    common 2M, 3M, or 4M suction arms, 5M, 6M or 7M extension suction arms can also be configured by

    installing the 3M steel cantilever below the extractor, and then it configures the flexible suction arm of the

    required length again.

4. The fume comes from the processing will be sucked into the extractor through the hood, first the fume

    passes the 1^st layer spark intercept steel mesh which will separate and intercept the spark initially. And

    the fume enters into second layer namely filter preventer plate to avoid residual sparks enter into main

    filter layer directly through ramifying the fume. At last the fume enters the third layer namely the main

    filter cartridge for ultimate purification.The filtration efficiency can reach 99.9%.

5. The filter elment of the welding fume extractor is made of imported PTFE membrane filter material of high

    filtration precision, and the filtration precision reaches 0.1 μm. In accordance with the extractor work

    intensity and the amount of dust, the usage life of the filter is different. The filter inside makes use of full

    automatically rotating blowing (pulse nuzzle cleaning) system for cleaning ash while connecting the

    compressed air source, it makes the surface of filter more clean and tidy. So the dust collector is always

    keeping the constant air flow.

Main features

1. CE certification is approvable.

2. Application for kinds of welding fume and others dust. For example, GSAW (CO2),MMA, TIG, MIG,Laser

    welding, floating dust and so on.

3. Large air flow, semi-automatically cleaning, wall amounted type saves space of workshop. 

4. Good parts make sure the qualilty, for example, Schneider,CHNT electrics, Siemens PLC and USA gas-

    pressure switch, Japan Toray filtering material, AKZO Nobel spraying powder etc.

5. Exellent housing and structure design makes sure the machine is durable.

Technical parameters