Jiangsu Yutong Drying Engineering Co.,ltd |
Verified Suppliers
|
|
high speed centrifugal spray dryer for catalyst in chemical industry
Description of Spray Dryer The machine adopts full close structure with primary middle and high effect air filter to fit one hundred thousand grade requirement, the tower body is provide cooling air jacket to make wall temperature less than80 degree, when the material stops on wall will not to be preheated and softened, it increases the powdercollection rate (95%) and will not appear mixing and sticking wall phenomenon.
spec | ZPG-25 | ZPG-50 | ZPG-80 | ZPG-100 | ZPG-150 | ZPG-200 | ZPG-300 | ||||||||
evaporation capacity(kg/h) | 25 | 50 | 80 | 100 | 150 | 200 | 300 | ||||||||
process amount of material liquid(kg/h) | 25-34 | 50-68 | 80-108 | 100-135 | 150-203 | 200-270 | 300-406 | ||||||||
output of finished pcoduct(kg/h) | 4.8-7.2 | 9.2-14 | 14.8-22.4 | 18.4-28 | 24-42 | 36.8-56.4 | 55-85 | ||||||||
solid content of material liquid( %) | 18-30 | ||||||||||||||
moisture content of finished product( %) | 3-5 | ||||||||||||||
electric power(kw) | 63 | 132 | 153 | 204 | 246 | 330 | |||||||||
heat source | Steam pius electricity | ||||||||||||||
Collecting method of product and its efficiency | Grade one or two or three stage cyclone wet dust remover is greater
than or equal to 95% | ||||||||||||||
automatic control meters and instruments | indicator of not air and exhaust air temperature | ||||||||||||||
temperature of air inlet(℃) | 160-220 | ||||||||||||||
temperature of air outlet(℃) | 80-100 | ||||||||||||||
L | 7000 | 8000 | 9800 | 11000 | 12200 | 14100 | 15000 | ||||||||
overal dimensions(mm) | W | 4000 | 5000 | 5700 | 6200 | 7000 | 7800 | 9000 | |||||||
H | 6200 | 6900 | 8000 | 8900 | 10750 | 11900 | 13000 |