Jiangsu Yutong Drying Engineering Co.,ltd |
Verified Suppliers
|
|
Granule & Powder Fluid Bed Dryer In Pharmaceutical , Fluidized Bed Processor Easy To Operate
Working principle
After the air is purified by heating, it is introduced from the
lower part by the induced draft fan and passes through the hole
mesh plate of the hopper. In the working chamber, fluidization is
formed by stirring and negative pressure, and the water is quickly
evaporated and then taken away with the exhaust gas, and the
material is quickly dried.
Features
The fluidized bed dryer has a circular structure to avoid dead
ends.
The hopper is set to agitate to avoid agglomeration of wet
materials and formation of a ditch during drying.
The use of tumbling and unloading is convenient and rapid, and the
automatic feeding and discharging system can be designed according
to requirements.
The seal is operated under negative pressure and the gas stream is
filtered. It is easy to operate and easy to clean. It is an ideal
equipment that meets the requirements of “GMP”.
The drying speed is fast and the temperature is symmetrical. The
drying time of each batch is generally 20-30 minutes.
Application range
Mechanism screw extrusion particles, rocking particles, wet high
speed mixing granulation particles.
Wet granules and powdery materials in the fields of medicine, food,
feed, and chemical industry are dry.
Large granular, small, viscous, granular material.
Konjac, polyacrylamide and other materials that change in volume
when dried.
Equipment composition
1, the skip
2, control valve
3, initial effect filter
4, sub-high efficiency filter
5, heater
6, liquid pump
7, induced draft fan
Composition chart
Composition chart
8, silencer
Models and parameter
Item | Model | |||||||||
GFG-60 | GFG-100 | GFG-120 | GFG-150 | GFG-200 | GFG-250 | GFG-300 | ||||
Volume of hopper | Liter | 200 | 300 | 400 | 500 | 650 | 800 | 1000 | ||
Production capacity | kg/batch | 30-60 | 50-100 | 60-120 | 70-150 | 100-200 | 120-250 | 150-300 | ||
Air inlet temperature | 0C | 50-100 | ||||||||
Fan | Blast | M3/h | 2576 | 3488 | 3619 | 5114 | 5153 | 6032 | 7185 | 7766 |
Air pressure | Pa | 5639 | 5080 | 7109 | 5869 | 9055 | 7610 | 7400 | 7218 | |
Motor power | kw | 7.5 | 11 | 11 | 15 | 18.5 | 22 | 22 | 30 | |
Agitator | Speed | r/min | 11 | 11 | 11 | 11 | 11 | 11 | 11 | |
Motor power | kw | 0.55 | 1.1 | 1.1 | 1.5 | 1.5 | 2.2 | 2.2 | ||
Steam | Pressure | Mpa | 0.4 | 0.4 | 0.4 | 0.4 | 0.6 | 0.6 | 0.6 | |
Consumption | kg/h | 140 | 170 | 210 | 240 | 230 | 280 | 280 | ||
Compressed air | Pressure | Mpa | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | |
Consumption | m3/h | 0.6 | 0.6 | 0.6 | 0.9 | 0.9 | 0.9 | 0.9 | ||
Weight of main frame | kg | 1000 | 1200 | 1200 | 1500 | 1700 | 2000 | 2200
|