|
[China]
Trade Verify
Address: No. 26, Dongqing Street, High-tech Zone, Zhengzhou ,Henan, China
Contact name:Daniel
HENAN ZG INDUSTRIAL PRODUCTS CO.,LTD |
|
Verified Suppliers
|
|
|
Industrial Ceramic Lining for protection against wear and corrosion
Technical Ceramic Lining for protection against wear and corrosion
Lining with technical ceramics is used to protect various equipment against mechanical and corrosive wear.
Related Data
| Main component | 99%Al2O3 | S-SiC | ZrO2 | Si3N4 | ||
| Physical Property | Density | g/cm3 | 3.9 | 3.1 | 6 | 3.2 |
| Water Absorption | % | 0 | 0.1 | 0 | 0.1 | |
| Sinter Temperature | °C | 1700 | 2200 | 1500 | 1800 | |
| Mechanical Property | Rockwell Hardness | HV | 1700 | 2200 | 1300 | 1400 |
| Bend Strength | kgf/mm2 | 3500 | 4000 | 9000 | 7000 | |
| Compression Intensity | Kgf/mm2 | 30000 | 20000 | 20000 | 23000 | |
| Thermal Property | Maximum working temperature | °C | 1500 | 1600 | 1300 | 1400 |
| thermal expansion coefficient 0-1000°C | /°C | 8.0*10-6 | 4.1*10-6(0-500°C) | 9.5*10-6 | 2.0*10-6(0-500°C) | |
| 5.2*10-6(500-1000°C) | 4.0*10-6(500-1000°C) | |||||
| Thermal Shock resistance | T(°C) | 200 | 250 | 300 | 400-500 | |
| Thermal Conductivity | W/m.k(25°C | 31 | 100 | 3 | 25 | |
| 300°C) | 16 | 100 | 3 | 25 | ||
| Electrical Property | Resisting rate of Volume | ◎.cm | ||||
| 20°C | >1012 | 106-108 | >1010 | >1011 | ||
| 100°C | 1012-1013 | – | – | >1011 | ||
| 300°C | >1012 | – | – | >1011 | ||
| Insulation Breakdown Intensity | KV/mm | 18 | semiconductor | 9 | 17.7 | |
| Dielectric Constant (1 MHz) | (E) | 10 | – | 29 | 7 | |
| Dielectric Dissipation | (tg o) | 0.4*10-3 | – | – | – | |
It is characterized by:
The main types of equipment that use lining:
crushing and shredding equipment (centrifugal-impact crushers, vortex, rotary, jet, abrasive, coal mills, etc.);
equipment for the classification and enrichment of ore (hydrocyclones, etc.);
pumping equipment, centrifuges;
cyclones and calcinators of cement plants, concrete mixers;
capacitive equipment;
lining of conveyor chute, pipelines, feeders, conveyors, pulp conditioning units, drums of magnetic separators, screws, etc.
Installation of lining is carried out with the help of adhesive joints, cementing, mechanical fastening or welding. Possible materials: aluminum oxide, zirconium dioxide, silicon carbide, as well as other ceramic materials for special requests.
We delivers lining, including the individual geometry of equipment, advises on installation issues, selection of installation facilities.
Service life of such ceramic lining is usually 5-15 times higher than life of lining by chromium-nickel alloys, stone casting, polyurethane and rubber.
We serially produces lining plates for X-ray luminescent separators for the diamond mining industry and sand caps for hydrocyclones.
