Active Member
|
[China]
Address: 3C Yuansheng International Building, Zhengzhou City, Henan Province, China
Contact name:Amy zhang
Henan Jinzhen Boiler Co., Ltd. |
|
|
Environmental Friendly Used Engine Oil Recycling Waste Oil Refining To Diesel And Gasoline Machine
Waste engine oil /pyrolysis oil can be refined into valuable diesel oil through catalytic cracking and high temperature distillation technology. It is a method of separating mixtures based on differences in volatilities of components in a boiling liquid mixture. After being distilled by the distillation plant, the oil may have dark color with bad smell, then we suggest to deep purify the oil, with Jinzhen matched color and smell removal system, you will get clean diesel oil as final products with beautiful light yellow color.
This machine will need one-time catalyst which is produced by our company only, there is no need to buy from other catalyst factory as we have the catalyst formula .it is customized.
The pyrolysis oil with black color after distillation and remove color and smell , we will get synthetic diesel oil with yellow color,which can be used for diesel engines like trucks , tractors , ships etc.
| No. | End Production | Yield | Usage |
| 1 | Diesel | 73% | Used for diesel engine |
| 2 | Gasoline | 12% | Used for gasoline engine |
| 3 | Residue Oil | 9% | * Feeding into Pyrolysis Machine for second Pyrolysis * Sold directly for building road |
| 4 | Non-Condensible Gas | 3% | Recycle as Heating fuel after treated by Gas-treatment System |
| 5 | Other | 3% | * Water and impurity 2% * Loss 1% |
Technical Specification
Working process of waste engine oil distillation machine
Work process
Raw oil after dewater process goes into reactor. Heating, gasifying
and cooling to get petrol and diesel component.
After heating and gasifying, Petrol gas expels from top outlet of
catalyze tower, and goes into petrol storage tank after cooling
through
condenser.Then inject petrol into another big storage tank.
After heating and gasifying, Diesel gas expels from top outlet of
catalyze tower, and goes into diesel storage tank after cooling
through
condenser. Then inject diesel into another big storage tank.
Distilled diesel after treatment by oil reconcile tank,will
becoming fuel oil with high quality.
A little of flammable gas go through medium tank and into exhaust
gas treatment equipment to be processed. And then go through water
deal
into furnace to burn.
The main list of waste oil distillation equipment
A. Vertical reactor/Horizontal reactor
B. Reducer system
C. Condensation system
D. Collector
E. Oil collecting tank
F. Residue tank
G. Oil-gas separator
H. Water cooling system
I. Water seal
J. Pressure & Temperature monitoring gauge
K. Deodorization system
L. Efficient anti clog cooling system
M. Gas heating system (waste gas process system)
N. Smoke desulphurization and dust removal system
Equipment Feature
a. Reduce pressure distillation technology--- advanced distillation
This new technology is better than original ordinary pressure
distillation technology, which shows on purity,
transparence, and lightness. This technology will do deodorization
and destinke process to the raw material
oil automatically by "dry type" reduce pressure distillation
method, which can fall of the temperature of
distill process and the oil output will higher 5%-10%.
b. Continuous produce 24-hours--- advanced distillation
24-hours raw material put into automatically according to oil
output flow and reactor temperature.
c. High efficient gas heating system--- advanced distillation
During this process, it will produce a large amount of gas
CH4-C2H6, which cannot be fluidity with
normal temperature and pressure. Those gas will be fully burned in
the special gun nozzle and
produce a plenty energy.
d. Intelligence smoke dust removal system--- advanced distillation
The smoke dust removal system with intelligence desulphurization,
have a special with bi-directional
water impact cyclone dust remove room, which can ensure the smoke
discharge amount meet
governmental relative standards.
After-sales service
1.Engineers with over ten years’ waste to oil recycling experience will be dispatched to your place to provide technical service in guiding plant installation, plant commissioning as well as worker training.
2.We all know that good plant design and quality are essential, and good installation and training service are as important as or even more important than good plant design and quality. It is very dangerous if clients can not install or run the plant properly.
3.So, after plant installation finishes, our engineers are required to help you run the plant for at least 15 batches, enabling your workers to master all the operating skills needed and then operate the plant on their own.
FAQ of waste engine oil distillation machine
Q: Are there any bad smell or odor from waste tyre oil distillation equipment while distillation system is working?
A: There will be no smell at all as the gas produced by waste oil distillation plant will be purified by our exclusive tail gas purification unit before emission.
Q: What is the yield of this waste tyre oil distillation equipment?
A: Typically the yield of our waste oil distillation plant is between 85-90% (depending on variations of water content, light HC and others ingredients from waste oil.)
Q: How many areas are required to build the waste tyre oil distillation equipment?
A: The land area required usually depends on the capacity of your plant. We can calculate the area needed and give you the plant designs.
Q: What is the warranty of the waste tyre oil distillation equipment?
A: 12 months free guanantee and life long standard paid service.
Q: Can you install the production line and train our stuffs?
A: Yes we can. We'll send engineers to help you install the waste oil distillation plant and train your workers until the machine is skillfully operated.
Successful Case
