Powered Steam Automatic 1 ~10 Ton Condensing Steam Boiler Natural Gas Fired

Powered Steam Automatic 1 ~10 Ton Condensing Steam Boiler Natural Gas Fired ​

Model: industrial gas oil fired steam boiler

Structure:horizontal fire tube, wet back, three pass

Steam Capacity:1-20ton/hour

Steam Pressure:1.0Mpa(10bar),1.25Mpa(13bar),1.6Mpa(16bar),2.5Mpa(25bar)

Steam Temperature:184 °c,194°c, 204°c,226°c(As long as the steam temperature you need is lower than 226°c, we can do it).

Fuel:heavy oil, light oil, natural gas, city gas, lpg,lng,etc

Application: textile mill, food, beer and brewery factory,chemical industry, garment factory, printing mill, paper masking industry,milk pasteurization, pharmaceutical industry etc.

General Introduction

The exhaust gas temperature of normal three pass fire tube boiler is high, the water vapor is in the overheated or gaseous state. If the exhaust temperature is reduced to a sufficiently low level, the water vapor in the flue gas will condense and the latent heat of vaporization of the condensate can be used.

The automatic steam boiler which takes advantage of the water vapor in condensed flue gas,fully absorbs the exhaust heat of the boiler and the latent heat of vaporization of the steam is called a condensing boiler.

Performance Advantages

Except the features of normal three pass fire tube steam boiler, our condensing steam boiler has the following advantages:

1.High effiency(exceed 92%) and energy saving(save gas 3-5m3/h;save oil 3-5kg/h)..

(1).Three pass structure,which extend the flow of smoke and enhance the heat transfer.

(2).Adopt bog size whole corrugated furnace,big heating area,sastify the free expansion of boiler, improve the boiler effiency.

(3).Whole adopt corrugated tubes,strengthening heat transfer and eliminating welding stress. Other companies also use corrugated tubes, but we adopt the latest professor “Li Zhiguang”(a very famous boiler expert in China)technoly,the depth of the screw thread and spacing between two screw threads are rationally designed.

2.Enough steam output and high quality steam.

(1). Our boiler design big size water volume,the steam output is stable and steam quality is good.

(2).Design special steam water separator,reduce steam humidity and improve steam quality.

3.Safe and reliable.

(1).Whole wet back structure and transition multi-loop full-temperature condenser design, ND just material, fin tube design,which highly reduces the back plate sheet temperature(around 50°).

(2).Double layer 12cm aluminum silicate insulation material,two stage anti-leak design and tight seal to avoid leakage phenomenon.

(3).Design tension bars,increasing the tube plate strength, preventing cracking.

(4).Explosion proof door design,prevent explosion, reduce the damage to the boiler, improve the safety of boiler.

(5).Two water level gauges and two Spring Safety Valve, Backup protection, safe and reliable.

4.Long life span(More than 20 years ).

(1).5-10% overload capacity design and reasonally configurate spare parts,reduce equipment fatigue.

(2).New type refractory material,solidification strong, long using life,which will not fall off after shaking.

(3).smoke chamber ultrasonic testing, overpressure 40-50% water pressure test,ensure the boiler quality.

(4).Raw materials are provided by China famous steel and steel pipe factory provide, which controls the boiler quality from source.

(5).61 years boiler manufacturing experience, mature design and production team.

5.Intelligent and fully automatic.

(1).Adopt world famous brand burner,including baltur, riello from italy, weishaupt,hofat from Germany,Olin from Finland, etc.

(2).Adopt mechanical-electrical integration control equipment and programmable logic controller(PLC) touch screen electric control cabinet.

(3).Continuous feeding water vertical multistage centrifugal stainless steel pump,no need manual adjustment and at same time, ensure the stable&safty running of boiler.

(4).Flow type intelligent water treatment equipment,automatic restore and microcomputer operation.

6. Easy inspection and maintenance.

(1).Double door design , detachable front flue box and rear flue box, and manholes and hand holes.

(2).Integrated wiring device, so that wire-controlled connection is more convenient and easier for maintenance.After installation, the boiler looks beautiful.