Active Member
|
[China]
Address: 3C Yuansheng International Building, Zhengzhou City, Henan Province, China
Contact name:Amy zhang
Henan Jinzhen Boiler Co., Ltd. |
|
|
China Highest Efficiency 96% Industrial Steam Boiler Diesel Fired With Condenser
General Introduction
The exhaust gas temperature of normal three pass fire tube boiler is high, the water vapor is in the overheated or gaseous state. If the exhaust temperature is reduced to a sufficiently low level, the water vapor in the flue gas will condense and the latent heat of vaporization of the condensate can be used.
The condenser steam boiler which takes advantage of the water vapor in condensed flue gas,fully absorbs the exhaust heat of the boiler and the latent heat of vaporization of the steam is called a condensing boiler.
| Model | WNS Series Oil Gas Steam Boiler with condenser |
| Structure | Wet Back Fire Tube Packaged Three Pass |
| Fuel | oil, gas, light oil, heavy oil, natural gas, lpg, lng, cng, diesel, biogas etc |
| Capacity | 1-20 ton per hour |
| Pressure | 0.7/1.0/1.25/1.6 Mpa (7/10/12.5/16 Bar) |
| Temperature | 170/184/194/204 Celsius |
| Application | Chemical, food and brewery, pharmaceutical, package plant, textile dyeing and printing industry, swimming pool, hospital,school,clothing industry etc. |
Performance Advantages
Except the features of normal three pass fire tube steam boiler, our condensing steam boiler has the following advantages:
1) Boiler construction is three pass fully wet back type.
2) Designed with proper grate area and furnace volume for efficient
burning of solid fuels.
3) Proper furnace volume is provided for liquid and gaseous fuels
for better combustion efficiency.
4) Higher boiler efficiency as designed properly with required
heating surface areas based on fuel type.
not only available for light oil, heavy oil, diesel, kerosene waste
oil, but also available gaseous fuels like natural gas, liquefied
petroleum gas, city gas
5) Steam Quality up to 98% dry saturated as large disengaging
surface and free board distance in boiler shell.
6) Consistent and trouble free performance under Normal Operating
Conditions.
Technical Parameter
| Model | Rated | Rated | Rated | Thermal | Fuel Consumption | Equipment Power | Weight | ||
Capacity (t/h) | Pressure (Mpa) | Temperature (C) | Efficiency (%) | Light oil (Kg/h) | Natural gas (Nm³/h) | Burn light oil | Burn gas | (t) | |
| WNS1 | 1 | 0.7/1.0/1.25 | 170/184/194 | >90 | 45-100 | 18-100 | 1.5 | 1.5 | 4 |
| WNS1.5 | 1.5 | >90.2 | 101.73 | 123.47 | 2.2 | 1.5 | 5 | ||
| WNS2 | 2 | 1.0/1.25/1.6 | 184/194/204 | >90.2 | 137.09 | 165.97 | 2.2 | 3 | 8 |
| WNS3 | 3 | >91 | 205.75 | 249.6 | 7.5 | 7.5 | 9 | ||
| WNS4 | 4 | >91 | 272.3 | 329.5 | 9 | 7.5 | 13 | ||
| WNS5 | 5 | >91.5 | 134-402 | 80-500 | 17.2 | 15 | 15 | ||
| WNS6 | 6 | >91.5 | 134-402 | 80-500 | 15 | 15 | 17 | ||
| WN8 | 8 | 1.25/1.6/2.5 | 194/204/225 | >91.6 | 523.4 | 631.5 | 26 | 22 | 21 |
| WNS10 | 10 | >91.6 | 212-890 | 150-1085 | 26 | 22 | 22 | ||
| WNS12 | 12 | >91.8 | 915.5 | 1090 | 26 | 22 | 27 | ||
| WNS15 | 15 | >91.8 | 931.5 | 1094.4 | / | / | 34 | ||
| WNS20 | 20 | >92 | 1380.33 | 1598.44 | / | / | 45 | ||
| Note: Parameter is for reference only, we can design the boilers based on customers’ needs. | |||||||||
When industrial steam boiler goes out of the factory, it is
composed of three parts: the main boiler, the chimney and the
pipeline system. The main body and the chimney have been
manufactured in the factory, and the supporting pipeline valves and
instruments of the main boiler have been installed randomly, and
then transported to the site to assemble the main body and the
chimney.On the spot connect the air source, power supply and water
pipeline to start the test.Greatly shorten the installation cycle,
and can guarantee the quality of boiler.
Application
Disel fired steam boiler is being widely used in hospitals, schools, textile mills, garment factories, large supermarket, garment factories, dyeing factory, hotel, dining room, dining room, swimming pool, food factory, beverage factory, soy products, meat products factory, cannery, brewery, pharmaceutical factory, packing plants, building materials factory, paint factory and other places of the enterprises and institutions.
FAQ
1. What are the available fuel for the oil gas fired boiler?
Oil gas fired boiler could burn both liquid fuel and gaseous fuel. The liquid fuel could be heavy oil, light oil, diesel, furnace oil, bunker oil, LPG (liquefied petroleum gas), etc. The gaseous fuel could be natural gas, city gas, bio-gas, etc.
2. Whether the boiler can burn dual fuel or multi-fuel?
boiler have oil burner, gas burner, and oil&gas dual fuel burner, we can offer the specific burner based on customers’ requirement.
3. What is the thickness of combustion chamber?
the thickness of corrugated furnace is different based on working pressure and furnace diameter, generally, the thickness is between 10~18mm, large combustion space, and combustion sufficient.
4. What is the inlet pressure of gas burner?
The inlet gas pressure is different for different capacity boiler, for example, the pressure for 2 ton steam capacity boiler is about 8~10KPa, while for 4 ton steam capacity boiler is about 18~20KPa.
5.The brand of burner?
The brands of burner are Italy Baltur, Rellio, Elco, etc.
