Active Member
|
[China]
Address: 3th Floor, No.30 Jufu Road, Weibin District, Baoji, Shaanxi, China
Contact name:kenny
Shaanxi Sier Electronics Co., Ltd. |
|
|
Features
·Pressure range -100kPa～0kPa～10kPa…100MPa
·Gauge, absolute, sealed gauge
·Constant current power supply
·Isolated construction, enable to measure various media
·Φ19mm standard OEM pressure sensor
·Full stainless steel 316L
Application
·Industrial process control ·Level
measurement ·Gas, liquid pressure
measurement
·Pressure checking meter ·Pressure
calibrator ·Liquid
pressure system and switch
·Cooling equipment and air conditioning system
·Aviation and navigation
inspection
Introduction
SPT81 high stable OEM sensor is the piezoresistive pressure sensor
with isolated construction and precise compensation. It uses high
stable silicon die. Stainless steel 316L housing with diameter
Ф19mm. Wider temperature compensation and zero correction are
calibrated by laser trimming technics. The measured pressure is
transmitted onto silicon die through 316L diaphragm and inner
media, to transform the pressure to electric signal.
SPT81 pressure sensor is inspected and screened on automatic
production line, testing and checking time after time strictly. It
is widely used for various pressure measurement fields.
Electric Specification
| Power supply | ≤1.5mADC |
| Electric connection | Kovar pin or 100mm silicon rubber flexible wires |
| Common mode voltage output | 50% input (typ.) |
| Input impedance | 3kΩ～6kΩ |
| Output impedance | 3kΩ～6kΩ |
| Response (10%～90%) | <1ms |
| Insulation resistor | 100MΩ, 100VDC |
| Overpressure | 2 times FS |
Construction
| Diaphragm | stainless steel 316L |
| Housing | stainless steel 316L |
| Pin | Kovar or silicon rubber flexible wires |
| O-ring | NBR |
| Net weight | ~16g |
Environment Condition
| Position effect | deviate 90° from any orientation, zero change ≤±0.05%FS |
| Shock | no change at 10gRMS,(20～2000)Hz |
| Impact | 100g,11ms |
| Media compatibility | the gas or liquid which is compatible with stainless steel and NBR |
Basic Condition
| Media temperature | (25±1)℃ |
| Environment temperature | (25±1)℃ |
| Humidity | (50%±10%)RH |
| Local air pressure | (86～106)kPa |
| Power supply | (1.5±0.0015)mADC |
Basic Specification
| Specification* | Min. | Typ. | Max. | Units |
| Linearity | ±0.15 | ±0.3 | %FS,BFSL | |
| Repeatability | ±0.05 | ±0.075 | %FS | |
| Hysteresis | ±0.05 | ±0.075 | %FS | |
| Zero output | ±2 | mVDC | ||
| FS output | 45 | 100 | 130 | mVDC |
| Zero thermal error | ±0.75 | ±1.0 | %FS | |
| Span thermal error | ±0.75 | ±1.0 | %FS | |
| Compensated temp. range | 0～70 | ℃ | ||
| 0～50(10kPa,20 kPa) | ||||
| Working temp. range | -40～125 | ℃ | ||
| Storage temp. range | -40～125 | ℃ | ||
| Stability error | ±0.2 | %FS/year | ||
| *testing at basic condition | ||||
Order Guide
