Mineral Water Cup Automatic Filling Machine Easy For Operation And Maintenance

Mineral Water Cup Automatic Filling Machine Easy For Operation And Maintenance

Summarize:

This machine is our new product best on Italian filling technique and our many years of production experience. Three functions washing, filling, capping are composed one body, reasonable design, beautiful outsider status, easy for operation and maintenance, full automatic. It is used for filling juice, tea and milk drinking.

Technical characteristics:

(1) The filling part adopts Italian technique and low gravity type vacuum filling principle. Second open valve technique is adopted to ensure full filling process level.

(2) Spring type bottle clip, empty bottle automatic over 180 degrees by rail, to washing the bottle inside.

(3) The whole machine adopts Human-machine interface, PCL controller, full automatic control technology with Frequency-converter stepless speed regulating. The equipment will stop when the temperature is low, and it does automatic control the feeding and back flow. Without bottle without cap, When no bottles available, the machine will be in waiting state,and no caps will be applied. When no caps available, or the bottles are jammed, the machine will stop automatically.

(4) The whole machine equips the lubricating oil system, controlled by PLC.

Main configurations:

1. Main motor: made in China
2. Reduction gears: made in China
3. Cylinder, magnetic valve: AirTAc
4. Liquid level sensor: China
5. Main shaft bearing: made in China
6. Seal ring: Sealtech(USA)
7. Capping bearing: SKF (Sweden)
8. All the valves, tank and pipe that contact with beverage adopts SS316

Technical specs:

1. Capacity: 15000bph at 500ml PET bottle
2. Washing heads: 40pcs
3. Filling temperature: normal
4. Filling method: Gravity type
5. Compressed air: 0.5～0.6Mpa

Power of the equipment:

1. Main motor: 7.5KW
2. Water consumption: 1.5T/h (excluding product water)
3. Dimensions: 4200×2850×2400mm
4. Weight: about 6500Kg

Spare part list

FAQ

1. Q: Can you send me the video to show how the machine works?

A: Certainly, we have made video of every machine and you can get them.

2. Q: How can I know your machine works well?

A: Before delivery, we have tested every machine and if you have special production condition, we could adjust the machine for you.

3. Q: How can I know your machine is designed for my product?

A: You could tell us your product which need to mark and give us the picture of your product. We will look for the similar one in the market, and then we test it on machine, finially show you the effects.

4. Q: Do you have a ISO certificate?

A: Sure.