Active Member
|
[China]
Address: Floor 7,No.18,Lane 99,Jiugan Road,Songjiang District,Shanghai,China.
Contact name:Zhang
Shanghai Yinma Marking Co., Ltd. |
|
|
logo & QR code portable fiber laser inkjet printer on food or beverage packaging
Optical fiber laser machine’s laser is transfered by optical fiber , the loss is less ,higher efficiency, lower power consumption, adaptation is broader, wavelength is 1064 um.
Due to the wavelength of the Optical fiber laser and Semiconductor laser machine is consistent, but the volume of the machine and deftness are comparable to those obtained with CO2 laser machine, which is suitable for static spray printing and dynamically spray printing , easy installation and flexible. Its application field, covers all objects other than the transparent glass products.
Technical parameters
| Model | YM-1320A |
| Laser ink jet printer | Optical fiber laser machine |
| Power of laser (W) | 20 |
| Maximum line velocity(mm/s) | 10~12000 |
| Wavelength of laser | 1064um |
| Etching depth (mm) | ≦0.1 |
| Code range(mm) | 100*100~150*150 |
| Minimum character(mm) | 0.2 |
| Minimum line width(mm) | ≦0.05 |
| Positional repeatability(mm) | ≤±0.00025 |
| Printing form | Dynamic code/Static code |
| Control system | MRD marking control software |
| Control form | Computer controller
|
| Scan form | Scanning galvanometer |
| Overall power(W) | 1000 |
| Cooling form | Air cooling |
| Power requirement | 220V±10％,50Hz,10A |
| Work environment | Temperature 5～45℃ relative humidity ≤90％(noncondensible) |
| Life of laser generator | ≥30000 Hours |
| Unsuitable material | Glasses/ceramics |
Notices
1. The main case should be connected with ground lead solely,the power line is based on single-phase three wire system.
2. The laser machines must be operated under the environment without dew.
3. The lenses of the laser machines must be kept clean.
4. If the machines discharge because of wet or any other reasons,it is very necessary to shut down and overhaul the machines.
5. To ensure safety by shutting down the power supply and high-pressure discharge before maintaining the machines.
