Active Member
|
[China]
Address: Floor 7,No.18,Lane 99,Jiugan Road,Songjiang District,Shanghai,China.
Contact name:Zhang
Shanghai Yinma Marking Co., Ltd. |
|
|
5w 355nm UV laser marking machine on phone case , cast-iron pipe , glass pipe
Machine Introduction
Purple light UV laser marking machine takes 355nm pumped purple light laser device as the light source and take advantage of previous generations machine to gain smaller diameter of focusing spot and fine marking effect.
The metal absorb purple light higher than infrared and therefore more suitable for marking on metal and glass materials compared with infrared pump machine. Narrower pulse width of laser makes a shorter time of processing on materials, thus the materials avoid being deformed or burnt due to thermal. With smaller heat affected area and more beautiful marking effect, our products can meet customer’s demand of higher marking requirements.
Technical Parameters
| Laser Source | UV Laser |
| Output Power | 5W |
| Wavelength | 355nm |
| Repeat Frequency | 10khz--- 100khz |
| Beam Divergence | -0.3 to +0.3mrad |
| Marking Scope | 110x110mm |
| Marking Linear Speed | ≤7000mm/s |
| Marking Depth | Max. 1.0- 1.5mm (hard steel) |
| Minium Line Width | 0.01mm |
| Minium Character Size | 0.2mm |
| Repeat Accuracy | ±0.003mm |
| Electrical Source | 220V / Single-Phase Circuit / 50/60Hz /4A |
| Warranty | 12 months |
| Operating symstem | windows |
1. Pre-sale services:
Select equipment model;
Design and manufacture products according to clients’ special requirement;
Train technical personnel for clients
2. Services during the sale:
Pre-check and accept products ahead of delivery;
Help clients to draft solving plans;
3. After-sale services:
Provide considerate services to minimize clients’ worries;
Assist clients to prepare for the first construction scheme;
Install and debug the equipment;
Examine the equipment;
Take initiative to eliminate the troubles rapidly;
Provide technical exchanging.
Image
