Zhengzhou Toper Industrial Equipment Co., Ltd. |
|
Continuous feed and discharge 2 or 3 phase separation
disk centrifuge separator
This disc centrifuge is a settlement centrifuge for separation
of difficult to separate materials (such as viscous liquid and
small solid particles composed of suspension or similar density
liquid composition of the emulsion, etc.). Disc centrifuge is the
most widely used settlement centrifuge. From the laboratory to
large-scale production has the applicable models. Can be used in
medicine, chemicals, dairy products, beverages, petroleum,
metallurgy, biotechnology and other industries.
This disc centrifuge can finish two separation process.
1. Liquid-solid separation, (lower solid content slurry
separation.) we name it clarify operation.
2. Liquid-liquid-solid separation,( a suspension of a viscous
liquid with fine solid particles or an emulsion of liquids of
similar density, etc.). We name it separation operation.
This disc centrifuge separation factor is high, strong separation
ability, the model can realize manual slagging or PLC program
control time automatic slag, reducing labor intensity, improve work
efficiency, hydraulic coupling to replace the traditional friction
plate clutch , On-site non-dust clean white health. Depending on
the need to use automatic or manual operation. Can also achieve
long-range self-control operation. Machine structure is simple,
easy maintenance.
This disc centrifuge work wrinciple.
This disc centrifuge is a vertical centrifuge, drum mounted on
the top of the vertical axis, driven by the motor drive and
high-speed rotation. The drum has a set of disc-shaped parts that
are nested with each other. There is a small gap between the disc
and the disc. Suspensions (or emulsions) are fed into the drum from
a feed tube located in the center of the drum. When the suspension
(or emulsion) flows through the gap between the discs, the solid
particles (or droplets) in the centrifuge under the action of
sediment to the disc to form a sediment (or liquid layer). The
sediment slides along the surface of the disc to be separated from
the disc and accumulated in the largest diameter portion of the
drum, and the separated liquid is discharged out of the drum
through the outlet. The role of the disc is to shorten the settling
distance of solid particles (or droplets), expand the settlement
area of the drum, the drum in the installation of the disc and
greatly improve the production capacity of the separator. The
solids accumulated in the drum are removed manually after the
separator has been shut down, or discharged from the drum without
stopping the machine.
This disc centrifuge technical parameters.
Item | DHC300 | DHC400 | DHC500 | DHC550 | DHC730 |
Drum inner diameter | 300 | 400 | 500 | 550 | 730 |
Drum speed (r/min) | 7300 | 7056 | 6600 | 6200 | 4500 |
Settlement area (cm²) | 17.2×107 | 28.5×107 | 35×107 | 67×107 | 90×107 |
Input capacity for water | 2 | 5 | 10 | 15 | 35 |
Motor power (kw) | 4.0 | 7.5 | 11 | 18.5 | 55 |
Our service:
1. We have professional person on line to provide you
comprehensive.easy-understanding and detail information and
technical data about the machine you interested;solve your
confusions or questions about the machine
2. Advise you the most suitable type of machine according to your
requirement for your reference
3. Arrange the schedule if you pay a visit to our factory.
4. Send our technical engineer to your country for installation
,operation test ,slove questions and so on if required.
Our package:
You can choose the centrifuge wrapped with foam plastic, and
usually used in domestic customer. Also we can package the
centrifuge into wooden box.
Last, besides disc centrifuge, also we have various centrifuge,
like SS/PS centrifuge, SD/PSD centrifuge, SGZ/PGZ centrifuge,
tubular centrifuge, decanter centrifuge and so on, any need
also you can write to me.