|
[China]
Trade Verify
Address: No. 1, Keyuan Road, Baiyun District, Guangzhou,Guangdong,,China
Contact name:Vivi
Guangzhou Guomat Air Spring Co., Ltd. |
|
Verified Suppliers
|
|
|
W01 358 7564 Firestone Air Mount Single Convoluted 1/4NPTF Portsize Rubber Air Spring
Essential Details
Product ID: 1B8×4
Condition: New without Factory Packaging
Brand: Netural or as customers' request
Ships From:
Baiyun District, Guangzhou, China
Ships To: Worldwide
Net Weight: 2kg/pc
Packing Dimensions: 24×24×24cm(3 quantities)
Cross Reference
Air spring supplier: Firestone
Supplier Number: W01-358-7564; W01 358 7564; W013587564; WO1-358-7564; WO1 358 7564; WO13587564; w01-358-7564; w01 358 7564; w013587564
Air spring supplier: Contitech/ Continental
Supplier Number: FS120-10; FS 120-10; FS120 10; FS 120 10; FS12010; FS 120-10 CI 1/4 NPT; FS 120-10 CI 1/4 NPT CA; FS120-10CI1/4NPTCA
Air spring supplier: Goodyear
Supplier Number: 1B8-550;1B8 550;1B8550
The detailed Specifications and techical parameters: 1B8×4
SINGLE CONVOLUTED AIR SPRING
AIR MOUNT
TYPE 1 BEAD PLATE
1/4 INCH NPT CENTERED PORT
The Max. OD: 230mm
Air hole/Air inlet/Air fittings: 1/4NPTF
Working Stroke: maximum 140mm to minimum 50mm
Top/Bottom cover diameter: 135mm
Mounting Screw: 2pcs×3/8-16UNC on each cover
Screw center distance: 35mm
AIR SPRING DESCRIPTION | Blind Nuts |
FORCE @ 8 IN STROKE | N/A |
AIR INLET TYPE | NPTF |
BELLOWS TYPE | Single Convolution |
CONVOLUTIONS | Single |
STYLE NO. | 116 |
BUMPERS | w/o Bumpers |
FORCE @ 9 IN STROKE | N/A |
END CLOSURE | Type 1 Bead Plate |
PRESSURE [MAX] | 100 psi |
About Guomat Air Spring
Guomat air springs are highly engineered elastomeric bellows with
specially designed metal end closures. Our standard two ply air
spring bellows is actually made up of four layers:
a. An inner liner of calendered rubber.
b. One ply of fabric reinforced rubber.
c. A second ply of fabric-reinforced rubber (with the cords at a
specific bias angle to the first ply).
d. An outer cover of calendered rubber.
AIR INLET
1/4” NPT is standard. 3/4” NPT is also available for most parts.
BLIND NUT
3/8-16 UNC thread x 5/8” deep (two or four per each plate depending
on part size). Used for mounting the part.
UPPER BEAD PLATE
Permanently crimped to bellows to form an airtight assembly which
allows for leak testing before the unit leaves the factory.
Zinc/chromate plated for rust protection.
GIRDLE HOOP
Wire wound type shown, molded into the bellows.
BELLOWS
Wall gauge is approximately 1/4”.
LOWER BEAD PLATE
Usually the same as upper bead plate, except without air inlet.
The reated picture
