30kw Electric Igbt High Frequency Welding Brazing Soldering Heating
Machine
1. Induction Brazing Machine Brief Introduction :
The portable induction heating power supply is most suitable for
induction brazing. It is equipped with a series of portable
generators. Its functions of rapid temperature control, energy
control, and fast beat operation are especially suitable for
brazing. These products are mainly used in various motor factories,
transformer factories, railway electric locomotives,
air-conditioner refrigerator compressors, etc., and are applicable
to various metal materials such as copper, aluminum and stainless
steel, and other metal parts.
2. Technical Parameters of LSW-30 Induction Brazing Machine:
Model | LSW-30 |
Working Voltage | 380V, 50/60HZ |
Max input power | 30kw |
Oscillation frequency | 25-40KHZ |
Duty cycle | 100% |
Cooling water flow | 25L/Min,0.15-0.2MPa |
Weight | 48kg |
Dimension (L*W*H ) | 690*290*600mm |
Material | stainless steel |
Color | support customized |
Usage | metal heating, brazing,melting etc |
3. Main characteristics of LSW-30 Induction Brazing Machine :
1 Siemens IGBT module and Inverting technologies of third
generation been used; Higher reliability and lower maintenance
cost.
2 100% Duty cycle, continuous working is allowed at maximum power
output.
3 Display of heating power and heating current and oscillating
frequency;
4 Simple to install, Installation can be done by unprofessional
person very easily;
5 Light weight
6 Advantages of the model with timer: The power and the operating
time of the heating period and the retain period can be preset
respectively, to realize a simple heating curve, this model is
suggested to use for batch production to improve the repeatability;
4. Induction Brazing Machine Application:
1) Heat treatment industry
a) a variety of steam, Motorcycle high-frequency hardening heat
treatment, such as: crankshaft, connecting rod, piston pin,
camshaft, valves, various gears within the gearbox, a variety of
fork, all kinds of spline shaft, drive axle, various small shaft
crank pin, a variety of rocker, rocker shaft, high-frequency
hardening heat treatment.
b) the hardware high-frequency hardening heat treatment, such as
pliers, hammers, strong pliers, wrenches.
c) hydraulic components such as: piston pump plunger, rotor pump
rotor, conversion shaft of the valves, gear of gear pump high
frequency quenching.
d) various electric tools gear shaft of the high-frequency
hardening heat treatment.
e) a variety of carpentry tools, such as: axes, planing and other
heat treatment.
2) Forging industry
a) plate heating, bending and forming.
b) standard parts, fasteners through the hot forming.
c) the hardware tools through heat, such as pliers, wrenches and
other heat through hot forming.
d) taper shank drill rod extrusion prospecting.
e)the pipe through the hot forming, such as bends and so on.
3) Brazing
a) carbide cutting tools welding. Such as turning, milling, cutter
knife.
b) the diamond saw blade welding. Such as diamond saw blade,
abrasive, jagged welding. Exploration drill bit used in welding,
such as word drill, drill welding horns.
c) brass, copper
4) Smelting
Steel,iron, non-ferrous metals,graphite crucible smelting
5. Related Products:
KGPS Melting Furnace | LSZ Melting Furnace | Cooling Tower |
| | |