|
[China]
Trade Verify
Address: No. 27 Fenglin Road, High-tech Zone, Zhengzhou City, Henan Province,China
Contact name:Amy
Zhengzhou Lanshuo Electronics Co., Ltd |
|
Verified Suppliers
|
|
|
LSN-125B Industrial Closed Circuit Loop Water Cooling Tower Manufacture
1. Working Principle of Water Cooling Tower:
1, Working fluid (water, oil o other liquid) flowing inside of the
coils, which is enwrapped by spray water on the outside. The heat
of water is transferred by the coil and become the saturated vapor
when meeting the water and air.
2, the heat is exhausted out of the tower by the tower by the top
fan; water is collected back to the bottom tank and circulates
continuously. The spray water is cooled down via PVC radiation fin
in the process of circulation, and flow is the same direction with
the fresh wind. The coil mainly takes sensible heat travel style.
3, the most benefit of this style is can avoid scale formation on
the outside of the coil. And this will apply especially to dealing
with high-temperature fluid (e.g. 60°C) or the fluid need big
temperature difference (e.g. 60°C to 32°C).
2. Body structure and performance of water cooling tower:
The 8ton fiber reinforced plastic cooling tower body is made of
high-quality fiberglass reinforced plastics, the rubber coating
surface of which is made of imported raw materials, which is even
in color and will not fade or degrade easily.All structure parts
made of steel are processed in hot-galvanizing.Injected molded
parts are used widely for they are erosion-proof, high in
intensity, light in weight and easy to attach.
The cooling tower has a successful water floating control,
rendering a loss less than 0.001%.
- Use low-speed wind machine to avoid too much water spray in the
air;
- Use waterproof sleeves on water distribution pipes to collect
spilled water;
- The ground frame is larger than enclosure and is equipped with
PVC shutters to avoid water spilling out of the tower.
3. Technical Parameter of closed circuit cooling tower:
Technical Parameters of Water Cooling Tower | ||
Model | LSN-125B | |
Water Cooling Capacity | 620000kcal / h | |
Cooling Water Flow | 100m³/h | |
Working Voltage | 380V - 50HZ | |
Water Outlet Diameter | DN125mm | |
Water Inlet Diameter | DN125mm | |
Water Replenishing Diameter | DN32mm | |
Drain Outlet Diameter | DN32mm | |
Fan (power of the generator) | 8kw*2sets | |
Spray Pump | Rated Power | 4kw |
Water Flow | 105m³/h | |
Circulating pump | Rated Power | 15kw |
Lift | 35m | |
Flow | 120m³/h |
2. Advantage of closed circuit cooling tower:
Water-cooled cable using high-quality multi-strand copper stranded copper material, high-strength flame-retardant rubber jacket tube, cold-formed joints, contact, and strong tensile strength.
1 .Easy to maintain: the huge inside spare space is convenient for people to access to maintain the cooling tower
2.Avoiding scaling: better water coverage around the tube is due to air and spray water flowing in smooth,patallel, downward path over the coil, promoting dry spots since the water is not stripped from the underside of the tubes by the airflow.
3. Parts of Closed Type Cooling Tower:
4. Cooling Tower Package:
1. the body is designed to 2 parts: upper body and bottom body, can be easily divided into two parts, and loaded into container;
2. shipping with 20ft and 40ft container.
5.Related Products:
Induction Heating Machine | Induction Quenching Machine | Induction Brazing Machine | Large Melting Furnce |
 |  |  |  |
 |  |  |  |
