OURUIDA CO.,LTD |
Verified Suppliers
|
|
100-300KHZ 10KW Ultrahigh Frequency Induction Heating Machine
Features:
1. Frequency is high, heating speed is very fast, high efficiency and easy operation..
2. Infineon module and Inverting technologies of third generation
been used; Higher reliability and lower maintenance cost.
3. 100% Duty cycle, continuous working is allowed at maximum power
output.
4. Simple to install, Installation can be done by unprofessional
person very easily;
5. Diode Rectification Technology Make sure high power factory—0.98.
6. Soft Switch Technology And prefect Protection system ( Over
Heat, Over Current, Under Voltage, Over Voltage, Phase Fail, Lack
Water) enhance Good Reliability.
7. Display of heating power, Power%, Current, Voltage, oscillating
frequency.
8. Light weight, small Size
2 Parameter
Type | UF-10KW |
Work power | 380V*3Phase 50-60hz |
The range of operating voltage | 340-430V |
Output power | 10KW |
Input current | 15A |
Heating Current | 5-45A |
Fluctuating frequency | 100-350KHZ |
Timing (Heat time, Retain time ) | 0.1-99.9S |
The flow rate of cooling water | >0.2Mpa >5L/min |
Water temperature protection point | 40℃ |
Duty cycle | 100%(40degree room temperature) |
Weight | 38KGS |
Size | 520*260*450mm |
Application:
(A) heat treatment industry (hardening, annealing, tempering and stress relieving):
1. Hardware tools high-frequency hardening heat treatment, such as;
vise, hammer, locking pliers, wrenches, screwdrivers
2. Variety of steam, motorcycle parts high-frequency hardening heat
treatment, such as: crankshaft, connecting rod, piston pin,
camshaft, valves, various gears within the gearbox, a variety of
fork, all kinds of spline shaft, drive axle, each high-frequency
hardening heat treatment of the kinds of small shafts, crank pin,
rocker arm, rocker shaft
3. Hydraulic components, such as: a rotor of the plunger piston
pump, rotor pump, various valves on the other to the heat treatment
of high-frequency hardening of the shaft, the gear pump gears, etc.
4. Automotive, machinery and equipment, electric tools, gear,
bearing high-frequency hardening heat treatment
5. Variety of woodworking tools, such as: ax, planer quenching
Wheels of a variety of automotive, motorcycle, marine and
engineering equipment, machine axis IF quenching, large parts of
the annealing, tempering and stress relieving.
(B) the welding industry (brazing)
1. Welding of various turning tools, planer, milling machining and
cutting tools
2. Welding of various diamond tools, such as: welding diamond saw
blades, diamond drill
3. Various shaped drill head column Button Bits, drill Yan
briquette, riveting rod drill carbide brazed
4. Various shearer teeth welding, various digging machine cutter
welding
5. Various mechanical welding tool
Air conditioners, refrigerators, refrigeration system brass
brazing, pipe brazing, as well as brass and aluminum tubes brazed
(C) forging industry
1. Heat pier variety of standard parts, non-standard parts, pieces
of copper, steel and aluminum parts casting and forging
2. Hardware tools such as pliers, wrenches before forging heating
3. Solder with solder tail caudal peduncle cone drill head forging
4. A extrusion molding on the stainless steel container.
(D) the precious metal smelting industry
The sample melting of steel, iron, copper, aluminum and other
tests, as well as gold, silver and other precious metals smelting
After-sale service:
1. Warranty time: Within 18 months from the date of delivering,
12months from date of receiving.
2. Within warranty all parts are free for customer, any fault
caused by non artificial reason, any quality problems such as
design,
manufacture, or procedure occurs, We shall provide replacement
parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period,
we will send maintenance
technician to provide visiting service after checking with the
customer and charge for a favorable price.
5. We will provide a lifetime cost price to the buyer with the
materials and spare parts used in system operation, equipment
maintenance.
6. The above mentioned are only basic aftersale service
requirements,we will make more promises related to quality
assurance and operation guarantee.