|
[China]
Trade Verify
Address: 528225, No 7, B Area Shishan Town ( Industrial Park), Nanhai District, Foshan City, Guangdong Province, China.
Contact name:Joanna Bao
OURUIDA CO.,LTD |
|
Verified Suppliers
|
|
|
8-25Khz 200KW Super Audio Induction Heating Machine
Main characteristics:
1. Infineon module and Inverting technologies of third generation
been used; Higher reliability and lower maintenance cost.
2.100% Duty cycle, continuous working is allowed at maximum power
output.
3. Simple to install, Installation can be done by unprofessional
person very easily;
4. Double digital Screen display, better to know the working performance of the machine.
5. High Efficiency Up to 98%.
6. Energy Saving Up to 20-30% compare with SCR machine.
7. Soft Switch Technology And prefect Protection system( Over Heat, Over Current, Under Voltage, Over Voltage, Phase Fail, Lack Water) enhance Good Reliability.
8. Display of heating power, Power%, Current, Voltage, oscillating
frequency.
9. Light weight, small Size
Parameter
| Type | SF-Y-200KW |
| Work power | 415V*3Phase 50-60HZ |
| The range of operating voltage | 380-460VAC |
| Output power | 200KW |
| Input current | 300A |
| Fluctuating frequency | 8-25khz |
| The flow rate of cooling water | 0.1-0.3Mpa 16L/Min |
| Water temperature protection point | 40℃ |
| Duty cycle | 100% (40degree room temperature) |
| Weight | Main parts:185KGS Transformer Parts: 160KGS |
| Size | Main part:L1100*600*H1050MM Transformer :780x450x700 mm |
Application:
1. Heating (hot forging, hot fitting and smelting): Steel bar,
Steel plate, Copper and Brass Bar, Cooper Plate and so on
2. Heat Treatment (surface quench): Gear, Pipe, Shaft, Rolling
3. Welding (braze welding, silver soldering and brazing):
A.Welding of various hardware cutting tools, such as diamond tool, abrasive tool, drilling tool, alloy saw blade, hard alloy cutter, milling cutter, reamer, planning tool and solid center bit.
B. Welding of various hardware mechanical gadget: Silver soldering
and brazing of metals of the same variety or different varieties,
such as hardware toilet and kitchen products, refrigerating copper
fitting, lamp decoration fitting, precision mold fitting, hardware
handle, eggbeater, alloy steel and steel, steel and copper as well
as copper and copper.
4. Annealing (tempering and modulation)
5. Tempering all kinds of the metals.
Advantage
1. Using the third generation Infineon IGBT.
2. 22 years experience, good quality and stable performance.
3. CE,SGS, TUV, ISO Certicated
4. DELIXI Air Switch
5. All screws in our machine are stainless steel.
6. Phase Bridge (Germany IXYS)
7.Water Temperature and water Pressure meter in the machine,double protection for the machine.
