OURUIDA CO.,LTD |
Verified Suppliers
|
|
30KHZ Induction Heating Treatment Equipment for All Metal Heating 160KW Induction Heating Machine
Main characteristics:
1. Infineon IGBT and Inverting technologies of third generation
been used; Higher reliability and lower maintenance cost.
2. 100% Duty cycle, continuous working is allowed at maximum power
output.
3. Simple to install, Installation can be done by unprofessional
person very easily;
4. Double digital Screen display, better to know the working performance of the machine!
5. 100% Duty cycle, continuous working is allowed at maximum power output.
6. Energy Saving Up to 20-30% compare with SCR machine.
7. Diode Rectification Technology Make sure high power factory—0.98.
8. Soft Switch Technology And prefect Protection system( Over Heat,
Over Current, Under Voltage, Over Voltage, Phase Fail, Lack Water)
enhance Good Reliability.
9. Display of heating power, Power%, Current, Voltage, oscillating
frequency.
10. Light weight, small Size
11. Transformer Ratios can connect different Induction coils,Work different workpiece.
12. Large working application, annealing, quenching/Hardening, Hot Forging, Heating Treatment, Soldering/Welding/Brazing and melting.
2 Parameter
Type | SF-160KW |
Work power | 380V*3Phase 50-60HZ |
The range of operating voltage | 380-460VAC |
Output power | 160KW |
Input current | 240A |
Fluctuating frequency | 10-40khz |
The flow rate of cooling water | >0.1Mpa 30L/Min |
Water temperature protection point | 40℃ |
Duty cycle | 100% (40degree room temperature) |
Weight | Main parts:165KGS Transformer Parts: 160KGS |
Size | Main part:L1100*600*H1050MM Transformer :780x450x700 mm |
Application: Hot Forging, Hardening, Quenching, Tempering, Melting,
Soldering, Brazing, Welding.
Hardening(Gear,shaft,pipe,bearing,pump fitting,steel plate,roller)
Forging(Bar,flat plate,bar end heating,pipe ends,bar end heating)
Pre-heating(Pipe,steel wire,stainless steel wire)
Brazing(Saw blades,carbide tools,cooper tube,aluminum part,drilling
tools,Pan)
Annealing(Steel pipe,golf ball head,brass lock,aluminum pan)
Shrink fitting(motor,pipe)
Melting(Iron,steel,brass,aluminum,silver,zinc)
After-sale service:
1. Warranty time: Within 18 months from the date of delivering,
12months from date of receiving.
2. Within warranty all parts are free for customer, any fault
caused by non artificial reason, any quality problems such as
design,
manufacture, or procedure occurs, We shall provide replacement
parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period,
we will send maintenance
technician to provide visiting service after checking with the
customer and charge for a favorable price.
5. We will provide a lifetime cost price to the buyer with the
materials and spare parts used in system operation, equipment
maintenance.
6. The above mentioned are only basic aftersale service
requirements,we will make more promises related to quality
assurance and operation guarantee
Advantage
1. Using the third generation Infineon IGBT.
2. DELIXI Air Switch
3. All screws in our machine are stainless steel.
4 Phase Bridge (Germany IXYS)
5 Water Temperature and water Pressure meter in the machine,double protection for the machine.
Working Shop:
Package: