|
[China]
Trade Verify
Address: 528225, No 7, B Area Shishan Town ( Industrial Park), Nanhai District, Foshan City, Guangdong Province, China.
Contact name:Joanna Bao
OURUIDA CO.,LTD |
|
Verified Suppliers
|
|
|
MF-45KW Medium Frequency Induction Heating Machine for Hot Forging
1 Main characteristics:
1 Infineon IGBT module and Inverting technologies of third
generation been used; Higher reliability and lower maintenance
cost.
2 100% Duty cycle, continuous working is allowed at maximum power
output.
3 Simple to install, Installation can be done by unprofessional
person very easily;
4 Double digital Screen display, better to know the working performance of the machine!
5 100% Duty cycle, continuous working is allowed at maximum power output.
6 High Efficiency Up to 98%.
7 Energy Saving Up to 20-30% compare with SCR machine.
8 Diode Rectification Technology Make sure high power factory—0.98.
9 Soft Switch Technology And prefect Protection system( Over Heat,
Over Current, Under Voltage, Over Voltage, Phase Fail, Lack Water)
enhance Good Reliability.
10 Display of heating power, Power%, Current, Voltage, oscillating
frequency.
11 Light weight, small Size
12 Water Pressure and Water Temperature meter in the machine, easy to check the water pressure and water temperature for the working!
2 Parameter
| Type | MF-45KW |
| Work power | 3×380V/415V,440V,480V |
| The range of operating voltage | 340V-430V |
| Output power | 45 KW |
| Input current | 67A |
| Fluctuating frequency | 1-20KHZ |
| Timing (Heat time, Retain time , Cool time) | 1-99S |
| The flow rate of cooling water | 0.08-0.16 Mpa 20L/Min |
| Water temperature protection point | 50℃ |
| Duty cycle | 100%(40degree room temperature) |
| Weight: | Main parts: 65KG Extensive Parts: 110kg |
| Size: | Main Parts: 650*550*360mm Extensive Parts: 1000*600*800mm |
Application:
Pre-sale service:
1. recommend the most suitable machine for customers, according to
their requirements.
2. Inquiry and consulting support.
3. Sample testing support.
4. View our Factory.
In-sale service:
1. Strictly manufacture the machine, according to relevant
technical standards.
2. Take run test, according to relevant equipment test run
regulations.
3. Strictly check up the machine, before delivery
4. Delivery on time.
After-sale service:
1. Warranty time: Within 18 months from the date of delivering,
12months from date of receiving.
2. Within warranty all parts are free for customer, any fault
caused by non artificial reason, any quality problems such as
design,
manufacture, or procedure occurs, We shall provide replacement
parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period,
we will send maintenance
technician to provide visiting service after checking with the
customer and charge for a favorable price.
5. We will provide a lifetime cost price to the buyer with the
materials and spare parts used in system operation, equipment
maintenance.
6. The above mentioned are only basic aftersale service
requirements,we will make more promises related to quality
assurance and operation guarantee
Advantage
1). Using the third generation Infineon IGBT, Can save 10-20%
electricity compare SCR parallel type
and Lamp Vacuum Tube type. Small size compare with Lamp Vacuum Tube
Induction Heating Mahine.
2). DELIXI Air Switch
3). All screws in our machine are stainless steel.
4) Phase Bridge (Germany IXYS)
5) Water Temperature and water Pressure meter in the machine,double protection for the machine.
Working Shop:
Package:
