QINGDAO SHUIMU INDUCTION EQUIPMENT CO.,LTD |
Application: As ceramic parts of flexible pad and channel heaters at operations of pre and post weld heat treatment; Welding process, stress-relieving, pre-heating & post heating, ship-building, other resistance-heating environments..
Properties: Higher density, higher surface finish and uniformity than heat press cast method, excellent thermal conductivity and heat transfer, resistance against thermal shock and mechanical abuse..
Ceramic Beads for Pad Heaters
1), Ceramic beads for flexible ceramic pad heater
|
2) 80/20 Nickel-chrome wires
|
3) Heaters' Size can be customized
|
4), 5-7 days lead time
|
5) Most favorable prices |
Technical data
| |
Density | 3.65g/cm3 |
Alumina content | 95% |
Hardness(Mohs) | 9 |
Rockwell hardness(HRA) | over 75 |
Compression strength | 2000 MPa |
Safety working temperatures | over 1500 |
Water Absorption rate | 0.01% |
Thermal Conductivity | 24 W/mK |
Flexural Strength | 340 Mpa |
Ceramic beads for Pad Heaters | Main body beads |
Male end beads | |
Female end beads | |
Main body beads with fixing hole | |
Tail bead single hole |
We offers the widest range of ceramic beads for heat treatment. Our95% Alumina Ceramic Beads is manufactured by dry press method and sintered at temperature upto 1650° C. The production is under careful material selection of high grade alumina spray drying granulation from what we call calcined alumina, thus the quality stability is maximally ensured. It enjoys high temperature resistance, excellent insulating property, and efficient thermal conductivity and heat transfer. Thanks to its property, the ceramic beads is widely used as components of flexible ceramic heating pad and channel heaters at operation of pre and postweld heat treatment; Welding process, stress-relieving, ship-building, other heat-resistance-environment. Compared with hot press method, it proves higher density, higher surface finish and better uniformity, and be repeatedly used much longer.Compared with the traditional electric heater energy consumption can be reduced by 30%.
Ceramic beads in pink or white
*Main body bead
*Main body bead with hole
*Male end bead
*Male end bead with hole
*Female end bead
*Tail bead
The length of lead wire can be produce as per your your
requirement.
Insulation: Aluminium Oxide Ceramics (95%)
Heating Conductor: Ni-Cr wire(Cr20Ni80), 19/32 /34single strands
Temperature: Max. 1050 ° C
Power: 1.35 / 2.7 kW/3.5KW/10KW
Voltage: 30 / 60 V/220V
Amperage: 45A/60A