Active Member
|
[China]
Address: No. 2, Bixi West Road, Economic and Technological Development Zone, Changshu City, Jiangsu Province
Contact name:Lydia
HongChuang Import&Export (Suzhou)Co., Ltd. |
|
|
Principle of induction heating:
Induction heating is a method of heating a conductor material such as a metal material. It is mainly used for metal thermal processing, heat treatment, welding and melting.
Induction heating is the use of electromagnetic induction to generate electricity in the interior of the material being heated, relying on the energy of these eddy currents for heating purposes. The basic components of an induction heating system include induction coils, AC power and work-pieces. The coils can be made into different shapes depending on the heating target. The coil is connected to a power source that supplies an alternating current to the coil, and the alternating current flowing through the coil produces an alternating magnetic field that passes through the work-piece, which causes the work-piece to vortex to heat.
Technical parameters of induction hardening machine:
Item Model | GP-30 |
| Rated Voltage(V) | 380V/50Hz |
| Input Power(kVA) | 2~30 |
| Input Oscillation Frequency(kHz) | 30~100 |
| Load Duration | 100% |
| Cooling Water Pressure(Mpa) | 0.1~0.3 |
| Output Water Flow(L/Min) | 5~15 |
Dimension(L×W×H)
| 550×320×500 360×262×330 |
Advantages of Induction Heating Equipment:
1. Fast heating: the minimum rate of heating is less than 1 second (rate of heating is available for adjustment and control).
2. Wide coverage of heating: it can be used to heat various metal parts (replace removable induction coil as per different operating switches).
3. Easy installation: it can be used once it is connected with power source, induction coil as well as water supply pipe and rising pipe; it is small in size and light in weight.
4. Easy operation: you can learn to operate it within several minutes.
5. Fast start-up: it can be started to perform heating operation on condition that water and power supply is available.
6. Low power consumption: As compared with conventional vacuum tube high frequency equipments, it can save the power by approximately 70%. The smaller the size of the work piece is, the lower power consumption would be.
7. High effectiveness: it has such features as uniform heating (it is applicable to adjust the spacing of the induction coil to ensure the appropriate temperature as required by each part of work piece), fast warming and limited oxic horizon, and can guard against any waste after annealing.
8. Comprehensive protection: it has such functions as overpressure, over-current, overheat and water shortage alarm indications as well as automatic control and protection.
9. Controllable temperature: it is applicable to control the temperature for heating work pieces as per the preset heating time, and thereby control the heating temperature at a certain technical point.
10. Comprehensive full load design: it can work continuously for 24 hours.
11. Small size and light weight: it has a weight of only several dozens of kilograms, of which, the limited floor space can effectively save the workshop space.
12. Elimination of high voltage: it requires no step-up transformer which may produce approximately ten thousand voltage, and thus can ensure the maximum safety.
Several Induction coils:
