Home Companies Tongdy Sensing Technology Corporation

Grow Room Wall Mount Co2 Monitor / Greenhouse Carbon Dioxide Sensor

Active Member

Contact Us

[China]

Address: Building #8, Courtyard #9, Dijin Rd., Haidian Dist., Beijing 100095, China

Contact name:Michael Zhang

Tongdy Sensing Technology Corporation

Grow Room Wall Mount Co2 Monitor / Greenhouse Carbon Dioxide Sensor

Country/Region china
City & Province beijing beijing
Categories Gas Analyzers

Product Details

3 In 1 Co2 monitor With LCD display, relay, analog and Modbus

 

Specifications

 

Gas detected

Carbon Dioxide (CO2)

CO2 Sensor

Non-Dispersive Infrared Detector (NDIR) with more than 10 years 

lifetime

Temperature sensor

NTC

Humidity sensor

HS series capacitive sensor

Temperature dependence

0.2% FS/℃

Temperature correction

Self compensation

Power supply

24VAC/VDC, or 100~240VAC, 60HZ, selectable with the order 

Consumption

3.5 W max. ; 2.5 W avg. 

Accuracy@25℃(77℉)

±40ppm + 3% of reading  (0~5000ppm)

±75ppm or 10% reading whichever is greater (0~20,000ppm or 

0~50,000ppm)

Stability

<2% of FS over life of sensor (15 yr typical)

Calibration interval

ABC Logic Self Calibration Algorithm

Non linearity

<1% of FS

Pressure dependence

0.13% of reading per mm Hg

Altitude calibration

Programmable from 0-9,900m in 100m increments

Response Time

<2 minutes for 90% step change 

Signal update

Every 2 seconds

Warm up time

2 hours (first time)

2 minutes (operation)

CO2 measuring range

0~5,000ppm

0~20,000ppm or 0~50,000ppm optional 

CO2 setting & Display resolution

1ppm

Temperature measuring/ setting range

0~50℃(32~122℉)/ 5~45℃(41~113℉)

Humidity measuring/setting range

0~99%RH/ 5~95%RH non condensation

Analog output

0~10VDC linearized output or PID control output, 

selectable by end users

Output resolution

10Bit

Relay output

One or two dry contact outputs with programmable selection 

to control CO2, temperature, humidity

Rated switching current: 2A(220VAC/30VDC), resistance load

Communication interface

Modbus RS-485, 9600/14400/19200(default)/28800 or 38400bps (programmable selection), 15KV antistatic 

protection, 3 independent base address

Operation conditions

0~50℃(32~122℉); 0~95%RH,

Storage conditions

0~50℃(32~122℉); 5~90%RH non condensing

Weight

360g

Dimensions

130mm×90mm×40mm

Installment standard

65mm×65mm or 2”×4”wire box

Interface connections

Maxi. 9 terminals

Wiring standard

wire section area<1.5mm2

Approval Standard

CE-Approval

Programming and selection

Via internal jumpers and push-buttons on the panel 

 

 

Features

 

  • Wall mount type
  • NDIR infrared CO2 module inside with special ABC Logic Self Calibration System
  • 15 years lifetime of CO2 sensor
  • LCD display CO2, Temperature and RH real time measuring value
  • With buttons to adjust the setpoint of CO2, temp. & RH
  • Up to three 0~10VDC outputs or relay dry contact outputs, or up to three mix outputs.
  • Analog output with two alternatives: linearized over full range output or PID control output
  • Modbus RS485 interface optional, 15KV antistatic protection, independent base address setting
  • Via DIPs end user can select increasing/decreasing CO2 mode, heating/cooling mode, humidifier/dehumidifier mode
  • Via Advance Setup, end user can set differiential value for relay setpoints
  • 0~5000ppm CO2 range default, 0~20000ppm selectable
  • 24V or 100~240V power supply
  • CE-Approval

 

Applications

 

1. Hotel, exhibition hall, hospital, shop, restaurant, air port, train station, theater and other public places

2. House, villa, office, meeting room, classroom and other places

3. Greenhouse, mushroom, grown room and other agricultural applications 

4. All ventilation systems
 

Buttons and LCD

 


 

 

Mounting and Dimensions

 


 

 

Models Guide

 

F2000IAQ-CO2- X1 X2 Y1 Y2- RH- Z 

     

X1 (the product type)

      3- CO2 and temperature detection

      5- CO2 and temperature detection with Modbus RS-485 communication

 

X2 (display type)

0-LCD display 

2-Backlit LCD display

 

Y1 (Analog output)

0-no analog output

1- 1 X 0 – 10 VDC output

          2- 2 X 0 – 10 VDC outputs

          3- 3 X 0 – 10 VDC outputs

 

Y2 (Dry contact output)

 0- no dry contact output

1- 1 relay dry contact output

          2- 2 relay dry contact outputs

          3- 3 relay dry contact outputs

 

RH (Humidity detection and display)

         No RH option indicates no humidity detection and display

 

Z (power supply)

      C- 24VAC/VDC

      D- 100~240VAC (just for IAQ-CO2-300Y2/500Y2)

 

Example: F2000IAQ-CO2-3011 indicates that it can detect CO2 and temperature with one analog output  and one relay dry contact output. F2000AQ-CO2-5002-RH indicates that it can detect CO2 and 

temperature and humidity with two relays dry contact outputs, and Modbus RS485 communication

 

 

Wiring Diagram

 


 

Hot Products

Specfications Gas detected Carbon Dioxide (CO2) CO2 Sensor Non-Dispersive Infrared Detector (NDIR) ...
Specifications Monitoring parameters CO2 TVOC Temperature Relative humidity Sensing element Non...
3 In 1 Co2 monitor With LCD display, relay, analog and Modbus Specifications Gas detected Carbon ...
Specifications CO2 Sensor Non-Dispersive Infrared Detector (NDIR) Measurement Range 0~2,000ppm ...
Specifications CO2 Sensor Non-Dispersive Infrared Detector (NDIR) Measurement Range 0~2,000ppm ...
Specifications Gas detected Carbon Dioxide (CO2) Sensing element Non-Dispersive Infrared Detector ...