4.2mm Yellow Astra Tech EV Plastic UCLA Implant Abutment
Astra Tech EV® UCLA CoCr Base Castable Abutment
3.6mm(Purple)/ 4.2mm(Yellow)/ 4.8mm (Blue) (Engaging &
Non-Engaging)
Material:
CoCr base and castable plastic chimney
Made of CoCr base and castable plastic chimney material for the
stable retention of modelling materials
This base is available in two types of platforms: engaging and
non-engaging.
Approved by CE, ISO 9001, ISO 13485
| Base CrCo | A | B | C | D |
30.059 | EV 3.6 | Non-engaging | 2,90 | Circular | 1,00 | 4,50 |
31.059 | EV 3.6 | Engaging | 2,90 | Conic Evo | 1,00 | 4,50 |
30.060 | EV 4.2 | Non-engaging | 3,50 | Circular | 1,00 | 4,50 |
31.060 | EV 4.2 | Engaging | 3,50 | Conic Evo | 1,00 | 4,50 |
30.061 | EV 4.8 | Non-engaging | 4,10 | Circular | 1,00 | 4,90 |
31.061 | EV 4.8 | Engaging | 4,1 | Circular | 1,00 | 4,90 |
30.058 | EV Uniabutment | Non-engaging | 3,41 | Cone 66º | 0,85 | 4,40 |
Points of Astra Tech EV UCLA Cocr base:
■ Single, partial and fully edentulous situations
■ All positions in the mouth
■ Screw-retained restorations, limited to single-tooth only
Note: In cases where high biteforces are expected it is recommended
to select a titanium abutment if possible. CastDesign EV should
primarily be regarded as an abutment used when no titanium option
is available.
The CastDesign EV is a non-oxidizing high precious abutment
modified at the laboratory. CastDesign EV is for fabrication of a
customized abutment for cement-retained restorations, using regular
wax-up and cast-to techniques.
■ Can compensate for angulations up to 30°
■ Abutment Screw EV is color-coded
Note: For screw-retained restoration, CastDesign EV shall be used
for single-tooth applications only. Use of this product outside the
listed indications will compromise the function of the Conical Seal
Design and void the Dentsply Sirona implant warranty.