|
[China]
Trade Verify
Address: 1st Floor, No.10 YuYingStreet, LiJiaTang, BaiYun District, Guangzhou, China 510550
Contact name:Marz Pan
ANGELS Dental Implant Solutions Center |
|
Verified Suppliers
|
|
|
Engaging Dentsply Ankylos UCLA CoCr Base Castable Abutment
Dentsply Ankylos® UCLA CoCr Base Castable Abutment (Engaging & Non-Engaging)
Material:
CoCr base and castable plastic chimney
Made of CoCr base and castable plastic chimney material for the stable retention of modelling materials
This base is available in two types of platforms: engaging and non-engaging.
Approved by CE, ISO 9001, ISO 13485
CoCr Base | A | B | C | D | ||
| 30.050 | Non-engaging | 2,52 | Circular | 1,50 | 4,50 | |
| 30.250 | Non-engaging | 2,52 | Circular | 3,00 | 4,50 | |
| 31.050 | Engaging | 2,52 | Cone ANK | 1,50 | 4,50 | |
| 31.250 | Engaging | 2,52 | Cone ANK | 3,00 | 4,50 | |
Points of Dentsply Ankylos® C/X Abutment:
Fig. 5
Balance titanium abutments are machined with a sloping collar design in two collar heights of 1.5 and 3mm. The collar height is measured from the lowest point of the slope. Each abutment is produced with two emergence profile diameters of 5.5 (Fig.5, left, small) and 7.0mm (Fig.5, right, large) as a straight and angled (Fig.5, 15°) version. The angle of the angled abutment is designed away from the lowest point of the sloping collar.
