220VAC Protocol Converter V.35 To Unframed E1 Converter With 5 Years Warranty

V.35 to E1(unframed E1) Converter MODEL7288

Introduction:
MODEL7288 converter supports the conversion between E1 interface which accord with the ITU-T G.703 standard and V.35 interface, it can receive synchronous data of 2.048Mbps from E1 network, and transmit the data to ROUTER or other devices. The mode of interface is DCE, and it can be connected with DTE or DCE devices.
Features:
1. Convert V.35 interface to E1(2M unframed G.703) interface
2. Support line recovery clock, local clock and equipment clock
3. Support E1 port loop
4. E1 (G.703 ) interface support 120ohm (RJ-45) and 75ohm (BNC double coaxial)
Specifications:
E1 interface
Standard: Comply with ITU-T G.703
Output tingle displace: accord ITU-TG.735 advice
Input tingle limit: accord ITU-TG.823 advice
Output tingle: accord ITU-T G.823 advice
Signals: BNC: IN, OUT
RJ-45: T+, T-, R+, R-, GND
Working Synchronous serial, lucency transmission
Frame format: unframed
Interface rate: 2.048Mbps
Port coding: HDB3
Port transmission: 2KM
Port protection: 1500V electromagnetism isolate
Port connector: 120 Ohm(RJ-45) and 75 ohm(BNC double coaxial)
V.35 interface
Standard: Comply with V.35 (DTE)
Clock: Line clock, Local clock
Port connector: DB-25 female (DB25 to M/34 cable)
Line code: NRZ
Clock selection: Internal clock, V.35 line clock, E1 recovery Clock
Test facilityBite Local& remote loop test
Environment, Power and Dimension
Working temperature: -25 to 70°C
Storage temperature: -40 to 85°C
Humidity: Relative humidity 5% to 95%
Input power: 220VAC or -48VDC
Consumption: 2W
Power protection: From high voltage/short circuit
L×W×H: 227.4mm×146.3mm×42.7mm
Shell: Plastic
Weight: 260g
Warranty: 5 years
Approvals: FCC, CE, RoHS approvals