Home Companies Guangzhou HongCe Equipment Co., Ltd.

Color TV Signal Generator Audio Video Test Equipment - 1Vp-P/75Ω - Y, RY, BY

Guangzhou HongCe Equipment Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: Room 202, Building 4-2, No. 539, Shibei Industrial Road, Dashi Street, Panyu District, Guangzhou, Guangdong

Contact name:Tessa Huang

Inquir Now

Guangzhou HongCe Equipment Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Color TV Signal Generator Audio Video Test Equipment - 1Vp-P/75Ω - Y, RY, BY

Country/Region china
City & Province guangzhou guangdong
Categories Solar Chargers
InquireNow

Product Details

Color TV Signal Generator Audio Video Test Equipment - 1Vp-p/75Ω - Y, RY, BY

 

Product information:

AS305E color TV signal generator is a full-channel, multi-standard color TV signal generator. It uses an intermediate frequency vestigial sideband modulation and then frequency conversion radio frequency mode to ensure that the signal has consistent characteristics in the entire TV bandwidth, so it can be used as a standard-level TV signal source and a high-performance modulator. The channel, frequency, TV format, and output level of the signal source are all displayed on an LCD screen at the same time. Each video signal has independent key operation and instructions, so the operation and use are very convenient, and the display is intuitive.  Audio Video Test Equipment

The signal generator Audio Video Test Equipment not only has video signal and radio frequency signal output (the output amplitude of video signal and radio frequency signal are both variable), but also has external video signal and audio signal input modulation function; color and brightness separation signal (S-VIDEO) can be added as needed , Video component signal (Y, RY, BY), synchronization, blanking pulse signal output. The signal generator is very suitable for scientific research institutions, schools, factories and other units.

Parameter:

Video signal output                             Audio Video Test Equipment
Output amplitude≥1.5Vp-p(0-1.5Vp-p adjustable )/75Ω
PolarityPositive polarity
Blanking level0±0.2VDC
Synchronous signal ratio30%
External video signal input
Input amplitude1Vp-p/75Ω(Modulation rate of about 82%)
PolarityPositive polarity
Chrominance signal
Chrominance carrier frequency

4.433619 MHz PLA/B.D.G.H.I.K

3.579545 MHz NTSC/M

Chrominance phase error

Color sync + 3°

Each color±5°

Internal audio signal1kHz±10% sine wave
External audio signal input
External audio frequency range20Hz-15kHz
External audio input amplitude420mV/rms (The frequency deviation at 1kHz is about ±50 kHz)
Signal generator operating systemPAL/B.G., PAL/I, PAL/D.K, NTSC/M (Optional)
Video and audio carrier
Video carrier frequency range45MHz~871.25MHz
Frequency error≤7×10-5
Output amplitude50-110+10 -5 dBuV/75Ω
Video modulation modeAM / negative
Audio carrier and video carrier spacing

4.5 MHz NTSC/M

5.5 MHz PLA/B.G.H

6.0 MHz PLA/I.

6.5 MHz PLA/D.K

Video carrier to audio carrier ratio13±3dB
Out of band restraint≥ 50dB
Image signal
GrayscaleLinear 8 level street ladder signal (from black to white)
Square11 horizontal bar × 15 vertical bar
SpotHorizontal 15 points x vertical 11 points

Center cross

Audio Video Test Equipment

3 bars of 1 center vertical line, 2 for the left border line.

3 bar 1 for the center line, 2 for the upper and lower border line.

Black and white grid16 horizontal grid × 12 vertical grid
Multiwave group0.8 to 5MHz single frequency signals of 8 groups
Half black and half whiteThe left half is black and the right half is white
Standard color

Range format: 100/0/75/0 PAL system

77/7.5/77/7.5 NTSC

Red fieldAmplitude format: consistent with the same color
Green fieldAmplitude format: consistent with the same color
Blue fieldAmplitude format: consistent with the same color
White field100%White
Four vectorY=50%
RingY=100%, Radius 4.5 squares
 

Hot Products

IEC60990 Figure 4 Touch Current Measuring Network, Convenient to Use​ Products Introduction: This ...
IEC60990 Figure 5 Touch Current Measuring Network, Convenient to Use​ Applicable object: 1. ...
IEC 60745-2-5 Circular Saw Lower Guard Test Device, 0-30 times / min Standard: IEC 60745-2-5 : ...
Integrated Test Device For Circular Saw Switch And Lower Guard, 0-250V/5KW Built-in Load Standard: ...
48rpm Label Marking Abrasion Test Machine - 20mm Test Stroke A.1 Markings on controls shall be ...
IEC60990 Figure 5 Measuring Network, Touch Current Weighted for Letgo-immobilization​ IEC 60990:2016 ...