Home Companies Guangzhou HongCe Equipment Co., Ltd.

IEC62560 Clause 15 Circuit Figure 8 Light Testing Equipment For Non - Dimmable Lamp

Guangzhou HongCe Equipment Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: Room 202, Building 4-2, No. 539, Shibei Industrial Road, Dashi Street, Panyu District, Guangzhou, Guangdong

Contact name:Tessa Huang

Inquir Now

Guangzhou HongCe Equipment Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

IEC62560 Clause 15 Circuit Figure 8 Light Testing Equipment For Non - Dimmable Lamp

Country/Region china
City & Province guangzhou guangdong
Categories Other Roadway Products
InquireNow

Product Details

IEC62560 Clause 15 Test Circuit Figure 8 For Testing A Non- Dimmable Lamp

Product Introduction

The test circuit for testing a non-dimmable lamp is manufactured according to IEC62560 clause 15 figure 8.

 

Standard description:

15.Abnormal operation

Self-ballasted lamps shall not create hazard under abnormal operating conditions .

Self-ballasted lamps shall be constructed so that as a result of abnormal or careless operation ,the risk of fire and mechanical damage impairing safety of protection against electric shock is obviated .

Appling non-dimmable self-ballasted lamps on a diameter or an electronic switch is to be tested as a possible case of abnormal operation .

Test procedure :

Test non-dimmable lamp in test circuit shown in figure 8.

Determine R1 and S1 setting at which the maximum I r.m.s occurs.

Test at this situation ,and if the lamp passively fails within 60 min ,repeat the test at 10% lower I r.m.s. The lower I r.m.s shall be set in the decreasing potentiometer resistance direction .

Repeat this procedures until stable operation is achieved for minimum 60 min .

Operate the lamp fpr 8H at the above most onerous dimming level (potentiometer adjustment )

 

Compliance

 

Compliance is checked by operating the sample free burning ,vertical cap up position or in the burning position indicated on the packaging at room temperature and at the rated voltage .

In case a voltage range is declared ,the test has to be carried out at the mean voltage of that declared range .

In case of alternative rated voltages ,the test shall be performed separately for each rated voltage .

During this test the lamp shall not catch fire ,or produce flammable gases and live parts shall not become accessible with the standard test finger .

 

Notice

1. Please do not damage the appliance shape (such as scratching, bending, etc.).

2. Prevented from dust and moisture environment, in order to avoid the oxidation to affect the dimensional accuracy.

 

Hot Products

IEC60669-1 Self Ballast Lamp Load 3 Stations Box 300v Breaking Capacity And Normal Operation Life ...
IEC60598 50mm Steel Ball Vertical And Horizontal Impact Electronic Control Device For Housing ...
IEC 60068-2 Programmable Temperature And Humidity Chamber , Wide Temperature Control Range Product ...
Easy Operation IEC60990 Figure 4 Touch Current Test Network For Perception Or Reaction Protective ...
Shell anti electric shock IEC 61032 figure 2/ IEC 60529 standard test finger with thrust 10N 20n 30n ...
Variable Frequency Audio Video Test Equipment Environmental Considerations Output Capacity 20KVA ...