|
[China]
Trade Verify
Address: Room 202, Building 4-2, No. 539, Shibei Industrial Road, Dashi Street, Panyu District, Guangzhou, Guangdong
Contact name:Tessa Huang
Guangzhou HongCe Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
UL1054,UL943,IEC60669 Clause 18.3
Application
The overLoad test is achieved by connecting the number of 30
halogen lamps rated at 200W in parallel .
Lamps of any power can be used to reach the rated load.
Technical parameters:
| Input power | AC 220V, 20A, 50/60Hz (It depends on customer's national requirements) |
| the output voltage | AC 0 ~ 250V continuously adjustable,4 display instrument display, accuracy 0.5% |
| Output current | 0~24 A(can be customed) |
| Test current | This is achieved by connecting the number of halogen lamps rated at 200W in parallel. (Number of filament lamps: 30, switch rated current 16A); |
| Number of filament lamps | 30 (can be customed) |
| Touch screen display | Test voltage, test current, number of tests, bulb failure location, warning light information. |
| Counter | 1 ~ 999999 times can be preset |
| The number of output channels | 1 |
| Overtime protection | with the test current continuous power circuit protection function for 5 seconds. |
| surge current coefficient | Meet the requirements of UL1054 5.7.9, about 10-18 times. |
| The control plane size | About 1200 × 800 × 1700 (mm) |
Picture for reference:
