|
[China]
Trade Verify
Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK
Contact name:Lynette Wong
Dongguan Kingpo Technology Limited |
|
Verified Suppliers
|
|
|
IEC 60560 Figure 8 LED Light Testing Equipment For Non-Dimmable Lamp
IEC 60560 Figure 8 test equipment
IEC62560-1 Figure 8 Test Circuit For Non-Dimmable Lamp At Dimmer Or Electronic Switch
1. Use
Applying non-dimmable self-ballasted lamps on a dimmer or an electronic switch is to be tested as a possible case of abnormal operation..
2. Reference standards
IEC60560-Fig8
3. Technical parameters
Internal dimension | 105 X 267 X220 W *D*H mm |
2 | potentiometer R1 |
3 | resistor R |
4 | Triac BTA16/700 |
5 | Diac DB3 |
6 | capacitor C1 = 100 nF |
7 | capacitor C2 = 68 nF to 150 nF |
8 | induction L1 = 3 mH |
9 | basic load, incandescent lamp P = 60 W |
11 | I r.m.s. Ammeter |
Ammeter input Power | AC 220V 50Hz |
4.Test procedure:
Determine R1 and S1 setting at which the maximum I r.m.s . occurs.
Test at this situation, and if the lamp passively fails within 60 min, repeat the test at 10 % lower I r.m.s . The lower I r.m.s . shall be set in the decreasing potentiometer resistance direction.
Hot Tags: iec62560 test equipment, China, manufacturers, suppliers, factory, custom, wholesale, Lock Security Test Bench, Dielectric Strength Test Instrument, BS EN 13126 - 5 Figure A.2 Jointed Test Finger, Lamp Foot Twist Apparatus.jpg, Scratched Pin Electric Safety Testing Probes, IEC60529 IPX1 To IPX8 Test System
