Home Companies HK LEE HING INDUSTRY CO., LIMITED

Products List

Active Member

Contact Us

[China]

Address: 7F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China

Contact name:Nina She

HK LEE HING INDUSTRY CO., LIMITED

Featured Products: LX-Chroma2A Pocket Portable Spectrometer for LED Lamp Test Equipment with 10 cm Integrati, Digital Pocket Colour Temperature Meter with 10cm Integrating Sphere CCT Chromaticity Coor, 500VA 100mA AC Withstanding Voltage / Insulation Resistance Tester and more.

LX-Chroma2A Pocket Portable Spectrometer for LED Lamp Test Equipment with 10 cm Integrati

LX-Chroma2A Pocket Portable Spectrometer for LED Lamp Test Equipment with 10 cm Integrating Sphere LX-Chroma2A light source colorimeter is a newly developed pocket colorimeter, ...

[Last Updated : 2024-04-11]

Digital Pocket Colour Temperature Meter with 10cm Integrating Sphere CCT Chromaticity Coor

Digital Pocket Colour Temperature Meter with 10cm Integrating Sphere for Measuring CCT Chromaticity Coordinate It meets the high surface brightness quality control requirements of ...

[Last Updated : 2024-04-11]

Digital Pocket Colour Temperature Meter with 10cm Integrating Sphere CCT Chromaticity Coor

500VA 100mA AC Withstanding Voltage / Insulation Resistance Tester

Features TH5201B AC withstanding voltage insulation resistance tester High-brightness VFD display, eye-catching, beautiful 0-5kVAC / DC voltage output AC current 100mA test ...

[Last Updated : 2024-04-11]

500VA 100mA AC Withstanding Voltage / Insulation Resistance Tester

Temperature Controlled Small Drying Cabinet, Electric Heat Air Blast Drying Oven of Lab Dr

Temperature Controlled Small Drying Cabinet, Electric Heat Air Blast Drying Oven of Lab Drying Equipment Scope Provide for the industrial factory, labs, research and other ...

[Last Updated : 2024-04-11]

IEC EN 60065 Figure 8 / IEC EN 60950 Figure 4A - 50mm Impact Test Steel Ball with Ring

IEC EN 60065 Figure 8 / IEC EN 60950 Figure 4A - 50mm Impact Test Steel Ball with Ring EN IEC 60950 Figure 4A / EN IEC 60065 Figure 8 - 50mm Impact Test Steel Ball with Ring ...

[Last Updated : 2024-04-11]

IRAM 4220-1 Standard IP2X Jointed Test Finger with Test Cable

IRAM 4220-1 Standard IP2X Jointed Test Finger with Test Cable IEC 61032 the Standard Jointed Test Finger Probe B IP2X Protection Probe 1. Conforms to: Standard IEC 61032-1997, IEC ...

[Last Updated : 2024-04-11]

Electric Lab Equipment IPX5 IPX6 Brass Hose Nozzle, Water Jet Nozzle with Pressure Gauge

IEC60529 Spray water test Nozzle, IPX56 water Jet Nozzle Test Set consists of a jet handle that is equipped with a pressure gauge and an easy-to-adjust flow valve. The interchangea...

[Last Updated : 2024-04-11]

Electric Lab Equipment IPX5 IPX6 Brass Hose Nozzle, Water Jet Nozzle with Pressure Gauge

Length 100 mm * Diameter 4 mm Test Rod of EN IEC 60065 cl. 9.1.3

Length 100 mm * Diameter 4 mm Test Rod of EN IEC 60065 cl. 9.1.3 Basic Introduction: According to: IEC 60065:9.1.3, GB 8898:9.1.3, EN 61010-1, UL 3101-1, and CSA 1010-1. Openings ...

[Last Updated : 2024-04-11]

Small Finger Probe 8,6 Test Probe 18 of IEC 61032 & Small Finger Probe 5,6 Test Probe 19

Small Finger Probe 8,6 Test Probe 18 of IEC 61032 & Small Finger Probe 5,6 Test Probe 19 of IEC 61032 Conforms to: Standard IEC61032-1997, IEC60529-2001, GB/T4208-2008 and UL etc. ...

[Last Updated : 2024-04-11]

IEC 60884-1 Figure 10 Gauge with 1N Force and EN 60884 Figure 9 Gauge with 20N Force

IEC 60884-1 Figure 10 Gauge with 1N Force and EN 60884 Figure 9 Gauge with 20N Force Application: Gauge: 80mm long, 1N force. 20 N force. Conforms to IEC884-1 Figure 10 and Figure ...

[Last Updated : 2024-04-11]

IEC60884-1 Figure 10 Gauge with 1N Force for Checking Non-Accessibility

IEC60884-1 Figure 10 Gauge with 1N Force for Checking Non-Accessibility of Socket-Outlets with Increased Protection Application: Gauge: 80mm long, 1N force. Conforms to IEC884-1 ...

[Last Updated : 2024-04-11]

IEC EN 61010 Test Probe Kit of Rigid Test Finger & Test Pins & Test Thorn

IEC EN 61010 Test Probe Kit of Rigid Test Finger & Test Pins & Test Thorn Meets IEC 61010. Accessibility probes are used to test the size of openings to ensure that fingers and ...

[Last Updated : 2024-04-11]

Test Probe 12 Long Test Pin of IEC 61032 Fig. 8 / Test Probe 13 Short Test Pin

Test Probe 12 Long Test Pin of IEC 61032 Fig. 8 / Test Probe 13 Short Test Pin of IEC 61032 Fig. 9 Appliance: It's the necessary tool to proceed protecting electric shock test of ...

[Last Updated : 2024-04-11]

IEC/EN 61032 Figure 3 2.5 mm Test Rod with 3N Thrust & IEC/EN 61032 Figure 4 1.0 mm Test

IEC/EN 61032 Figure 3 2.5 mm Test Rod with 3N Thrust & IEC/EN 61032 Figure 4 1.0 mm Test Wire with 1N Thrust Basic Introduction: 1. According to: GB/T4208-2008 / IEC 61032:1997 / ...

[Last Updated : 2024-04-11]

SASO/IEC 60335-1, SASO IEC 60950, IEC 60950/EN60950 Non-Jointed Test Finger

SASO/IEC 60335-1, SASO IEC 60950, IEC 60950/EN60950 Non-Jointed Test Finger for Test Accessibility of Internal Conductive Parts The Rigid Test Finger is a precision test probe made ...

[Last Updated : 2024-04-11]

IEC60884 Figure 9 Gauge with 20N Force for Checking Non-Accessibility of Live Parts

IEC60884 Figure 9 Gauge with 20N Force for Checking Non-Accessibility of Live Parts, Through Shutters Application: Gauge: 80mm long, 20 N force. Conforms to IEC884-1 Figure 9, ...

[Last Updated : 2024-04-11]

IRAM 2092, AS/NZS/EN/SASO/IEC 60335 Test Probe Kit

IRAM 2092, AS/NZS/EN/SASO/IEC 60335 Test Probe Kit of Test Probe B, Test Probe 11, Test Probe 12, Test Probe 13, Test Probe 41 Meets IEC 60335. Accessibility probes are used to ...

[Last Updated : 2024-04-11]

UL1278 / UL1026 / UL507 Figure 8.2 S2140A Unjointed Rigid Finger Test Probe

UL1278 / UL1026 / UL507 Figure 8.2 S2140A Unjointed Rigid Finger Test Probe for Fan Impellers and other Moving Parts Technical parameters: 1. Straight Finger Diameter: 25.4mm(1 ...

[Last Updated : 2024-04-11]

UL6500 Figure B.1 / IEC60950-1 Figure 2C - Test Probe Telekom Sonde

UL6500 Figure B.1 / IEC60950-1 Figure 2C - Test Probe Telekom Sonde Purpose: Telecom-Test Probe meets IEC60950 Figure 2C and UL6500 Figure B.1 standards. is for the absolute share ...

[Last Updated : 2024-04-11]

IEC 60529 Test Finger Probe B with 10N Force for IPX Test Equipment

IEC 60529 Test Finger Probe B with 10N Force for IPX Test Equipment Force Level: 10N 1. Conforms to: Standard IEC 61032-1997, IEC 60529-2001, GB/T4208-2008 and UL etc. 2. The ...

[Last Updated : 2024-04-11]

Page 1 of 27 : |< << 1 2 3 4 5 6 7 8 9 >> >|