Home Companies DELI ELECTRONICS TECHNOLOGY CO.,LTD

Water Sterilizer UVC LED Lamp Module DC 24V With Cable XH2.54 2P Terminal

DELI ELECTRONICS TECHNOLOGY CO.,LTD
Active Member

Contact Us

[China] country

Address: RM 311 3/F LINZHAN FORTUNE BUILDING No.1 SHENHUA STREET SHENFENG ROAD LIUYUE LONGGANG AREA SHENZHEN,CHINA

Contact name:VIVI

Inquir Now

DELI ELECTRONICS TECHNOLOGY CO.,LTD

Water Sterilizer UVC LED Lamp Module DC 24V With Cable XH2.54 2P Terminal

Country/Region china
City & Province shenzhen guangdong
InquireNow

Product Details

DC24V Water Sterilizer UVC LED Lamp Module 2.0-3.0mW With Cable XH2.54 2P Terminal
 
Parameters:
  • Voltage: DC 24V
  • Current: 40±2mA
  • Environment temperature: ≤55℃
  • UVC LED Luminous Power; 2.0-3.0mW
  • Insulation and voltage resistance: AC 1500V, 50Hz / 1min
  • Lifespan: >10,000H
  • Dominant Wavelength: 270nm-285nm
  • Cut-out Hole:27.5mm
 

Optical and Electrical Characteristics @TJ=25℃

ItemsymbolconditionMinAverageMaxUnit
Angle

2θ1/2

24DC

---

120

---

deg

OutputP24DC---≥2---mW
Half-wave widthΔλ24DC811.512nm
Peak WavelengthλP24DC265275285nm
 
 
Features:

1. High performance: Kill 99.99% of harmful bacteria with UV light in seconds.
 

2. DIY Water Sanitizer solution: Clean water by installing a UVC LED module.
 

3. Environmental friendly: Chemical-free ultroviolet lighting source.
 

4. Long serving life: Nearly 10000 hours of working life.
 

5. Third party tested: CE, RoHS certificates.
 

6. Instant start.
 
 

 

Test Method:

1. Turn on the UVC LED device.
2. Make a bacteria smear of 0.1ml colon bacillus liquid with the density of 3000cfu/ml.
3. Expose the smear under the UVC LED device for 5 minutes with a distance of 1 cm.
4. Get the test result and calculate the disinfection rate.

 

 

Notes:

1. SMD diodes should not be exposed in the air. It may affect its working life.

2. Use the LED diode in 1 month when it is unsealed.

3. SMD diode storage temperature:10-55℃; Humidity<65%RH;

    It is suggested the SMD diodes should be used in one year.

4. The SMD diodes should be put into antistatic bags when it’s in stock

     because LED diode is electrostatic sensitive.

5. Deep UVC light may hurt eyes or skin.

     It is suggested to take countermeasures before exposing to UVC light.

 

UVC LED Testing
1.Turn on the UVC LED
2.Colon bacillus,The concentration of bacteria liquid is 3000cfu/mL,
Pick 0.1mL bacteria(about 300pc bacteria)to a board. Use this UVC led,
Shining 5min with distance 1cm,and then check.
3.Irradiated by a distance of 1 cm from the surface of the bacteria.
4.The shining time is 5 minutes.
5.Calculate the percentage of sterilization rate.





Deli electronics tehcnology co ltd
www.icmemorychip.com
www.uvc-led.net
Email:sales3@deli-ic.com
Skype:hkdeli881

sales: VIVI-CHEN

 

Hot Products

DBLS207G-2 SMD 1000V 2A SOP4 Integrated Circuit Chip With 365 Days Warranty Part no DBLS207G RD ...
Original New IC Chips Electronic Components ATMEGA128A-AUR TQFP-64 16MHz Speed Categories Integrated ...
Hot selling TMPN3150B1AFG packageQFP-64 original new chip for good price The TMPN3150B1AFG is a ...
5V928PGGI brand by IDT SMD 24-TSSOP packaged IC clock gernerator octal new and original DESCRIPTION: ...
ATMEGA32U4-AU# ATMEL LQFP32 SMD 8 bit microcontroller integrated IC chip original high quality ...
ATMEGA328P-AU# 8-bit 32K flash microcontroller chip integrated IC original high quality ATMEL ...